Source for birch-faced plywood

Wood working questions and answers in here please

Moderator: Moderators

Post Reply
User avatar
Mooncat
Senior Member
Posts: 11466
Joined: Sun Dec 23, 2007 4:11 pm
Location: Wales
Has thanked: 81 times
Been thanked: 72 times

Source for birch-faced plywood

Post by Mooncat »

I want to convert a 15 pane glazed internal door to plywood panels, Can anyone suggest a supplier of birch or similar light coloured ply in 3-4mm or 6-9mm. I can either use two pieces of the thinner ply togetger or a single of the thick as long as it is good both sides, as I want to varnish the ply to match the hemlock door. A single 8' x 4' sheet would be more than enough, or I could use off-cuts perhaps from a furniture maker. Pieces are 187mm x 332mm.
I started out with nothing, I still have most of it.

Directmail scam information site: http://astrocat.proboards.com/index.cgi?
owen
BANNED
Posts: 474
Joined: Mon Jul 31, 2006 10:24 pm
Has thanked: 0
Been thanked: 1 time

Post by owen »

i think birch ply is widely available from decent timber merchants
User avatar
Mooncat
Senior Member
Posts: 11466
Joined: Sun Dec 23, 2007 4:11 pm
Location: Wales
Has thanked: 81 times
Been thanked: 72 times

Post by Mooncat »

owen wrote:i think birch ply is widely available from decent timber merchants
The 3 I've asked only have the thick shuttering ply, or the far-eastern redwood(plundered rainforest). But I'll have to ask around a wider area next week.

I might have to consider fixing a piece of opaque material on her side of the door, and leaving it glazed
I started out with nothing, I still have most of it.

Directmail scam information site: http://astrocat.proboards.com/index.cgi?
User avatar
Gadget
Jack Of All Trades
Posts: 8008
Joined: Sun Dec 18, 2005 9:23 pm
Location: Whitley Bay
Has thanked: 344 times
Been thanked: 342 times

Post by Gadget »

Use 'Fablon'.. :lol: :lol: :lol:
By eck! ©
dewaltdisney
Senior Member
Posts: 17271
Joined: Fri Jan 20, 2006 5:51 pm
Location: Essex
Has thanked: 823 times
Been thanked: 3563 times

Post by dewaltdisney »

Give this firm a ring http://www.severnply.com/news/newsitem.php?id=73

They will give you a local firm who can supply you. I order through my local timber yard. Cabinet grade birch faced ply is around £40 a sheet.

DWD
owen
BANNED
Posts: 474
Joined: Mon Jul 31, 2006 10:24 pm
Has thanked: 0
Been thanked: 1 time

Post by owen »

Mooncat wrote:
owen wrote:i think birch ply is widely available from decent timber merchants
The 3 I've asked only have the thick shuttering ply, or the far-eastern redwood(plundered rainforest). But I'll have to ask around a wider area next week.

I might have to consider fixing a piece of opaque material on her side of the door, and leaving it glazed
i am suprised at that, my local merchant stocks it and they have a pretty limited range.

whereabouts in wales are you? if you are near swansea, Gower Timber should either stock it or be able to get it for you.
Post Reply

Return to “Carpentry/Joinery Forum”