ZANZIBAR TILES

graann · Post by **graann** » Mon May 25, 2009 3:25 pm

I am trying to find out how you tile a wall with irregular shaped 10 cm x 10 cm wall tiles. ( Topps tiles Zanzibar)
I assume tile spacers can be used but because of the irregularity of the tiles,must be used with installers eye for detail.
Any help appreciated.

thescruff · Post by **thescruff** » Mon May 25, 2009 3:32 pm

The left side matches the right, and the top matches the bottom, so normal spacers should be fine.

Make sure you get them all the same way round.

m3 fitter · Post by **m3 fitter** » Thu May 28, 2009 5:35 am

if the tile is so irregular ie: different sizes 9mm / 10mm / 11mm then just space by eye with a larger joint than usual ie: 5-8mm as opposed to 3mm - 4mm which is normal for walls

thescruff · Post by **thescruff** » Thu May 28, 2009 8:44 am

The edges are wavey M3 but they all match so the gap is uniform.

Provided you get them all the same way up

m3 fitter · Post by **m3 fitter** » Thu May 28, 2009 4:24 pm

haha nice tile .......... not