Showertray Q

59peejay · Post by **59peejay** » Thu Sep 10, 2009 1:52 pm

Am i pressuming right that no matter what size tray you get the fall from the waste goes to the extreme corner of the tray (as some diagrams don't show the fall/cut lines)?.My showering area will be 1.6mx0.8m and will probably be on a raised platform,i was looking at an 800mmx800mm tray as this would mean the least amount of cuts for the fall ,would this be your preference or a full length tray?any preference of make?.

RICO · Post by **RICO** » Thu Sep 10, 2009 2:53 pm

Hi there,

I'm sorry but I can't make any sense of your post.

What is it you are trying to work out.

Rico

thescruff · Post by **thescruff** » Thu Sep 10, 2009 3:06 pm

The tray is installed level.

59peejay · Post by **59peejay** » Thu Sep 10, 2009 3:36 pm

Sorry for the confusion what i mean is,i'm presuming that no matter how long the tray is the fall leads out from the drain all the way out to the extreme corners,that is you have to cut your tiles on 4 sloping sides all the way out to the corners?.Does that make it any clearer?.

thescruff · Post by **thescruff** » Thu Sep 10, 2009 3:54 pm

No, the fall is in the tray construction, the edges will be level.