Fixing plasterboard to plasterboard

Plastering questions and answers here please

Moderator: Moderators

Ted White
Newly registered Member
Posts: 3
Joined: Mon Mar 08, 2010 4:06 pm
Has thanked: 0
Been thanked: 0

Post by Ted White »

not sure what "wat" means. If there's more detail or references to lab data needed, just ask.
User avatar
paul the spread
Senior Member
Posts: 229
Joined: Sun Mar 22, 2009 7:37 pm
Location: EPSOM DOWNS, SURREY
Has thanked: 5 times
Been thanked: 23 times

Post by paul the spread »

i nearly fell off my chair laughing.... mass law my ars3.
marc1106
Senior Member
Posts: 824
Joined: Tue Jul 15, 2008 10:15 pm
Location: on my computer (obviously)
Has thanked: 4 times
Been thanked: 49 times

Post by marc1106 »

Python i think ted maybe a yank! after reading his post that how it comes across!!!! :thumbright: and they cant plaster over there! ::b
IF IT WERE EASY ITD B BORING!
Raf
Senior Member
Posts: 722
Joined: Fri Mar 07, 2008 4:47 pm
Location: Lancs
Has thanked: 1 time
Been thanked: 4 times

Post by Raf »

OP; i asked about green glue some time ago..... please can you update this post after with your opinion on its soundproofing ability?

Ted White; please may i see lab data and also can you highlight the bits relevant to the OP? thanks
GJO
Newly registered Member
Posts: 4
Joined: Tue Feb 23, 2010 10:17 pm
Has thanked: 0
Been thanked: 0

Post by GJO »

Ted White wrote:not sure what "wat" means. If there's more detail or references to lab data needed, just ask.
Ted, what data do you have to show that this won't work? There simply isn't the space for building out (~30mm to the window space) so I don't really have another option.

Would Green Glue have no damping effect? Is that not its explicit function?
Ted White
Newly registered Member
Posts: 3
Joined: Mon Mar 08, 2010 4:06 pm
Has thanked: 0
Been thanked: 0

Re: Fixing plasterboard to plasterboard

Post by Ted White »

I see quite a few posts. I thought I would have been alerted to new posts. Sorry for the delay.

The damping being discussed is known as constrained layer damping. It's essentially a sandwich of two layers of masswith a damping material in the center. As the wall is oscillated with a sound wave, the middle section of damping material is sheared. This shear force converts the kinetic movement of the wall into heat. You can Google all of this.

At any rate, damping is most efficient when the stiffness of the two halves of the sandwich are similar. Highly dis-similar stiffness materials don't create the shear force, therefore little damping. This is why you can't expect to directly damp a heavy masonry surface.

Regarding Mass Law, another well discussed principle you can Google at your leisure.
Post Reply

Return to “Plastering Forum”