Hello knowledgeable chaps,
I've got an aqua dec installed and ready to waterproof, I've got a Bal WP1 kit to do it.
My question is, should I just go ahead and tank the aqua dec as if it was any other bit of floor? (Primer, Tanking, Membrane, Tanking) or do I need to do something special?
Cheers,
GM
Impey Aqua Dec and Bal WP1
Moderator: Moderators
-
- Newly registered Member
- Posts: 18
- Joined: Wed Nov 04, 2009 2:34 pm
- Has thanked: 0
- Been thanked: 0
-
- Senior Member
- Posts: 6620
- Joined: Sun Jan 24, 2010 1:48 pm
- Location: Essex
- Has thanked: 39 times
- Been thanked: 621 times
Re: Impey Aqua Dec and Bal WP1
If it works on same principle as the system I use which is Impey, then it will be treated same as rest of floor. Instructions should point you in the right direction for that particular system though.
- Simon Site Manager
- Senior Member
- Posts: 3399
- Joined: Tue Oct 27, 2009 8:55 pm
- Location: St Helens Merseyside
- Has thanked: 48 times
- Been thanked: 202 times
Re: Impey Aqua Dec and Bal WP1
Hi Goldfish,
Impey have a very good website!
S
Impey have a very good website!
S
Measure twice, cut once!
-
- Newly registered Member
- Posts: 1
- Joined: Fri Feb 21, 2014 4:13 am
- Has thanked: 0
- Been thanked: 0
Re: Impey Aqua Dec and Bal WP1
Hi, I just wondered whether using the BAL WP1 directly on top of the aqua dec was successful ?
-
- Newly registered Member
- Posts: 9
- Joined: Fri Feb 14, 2014 8:56 am
- Location: London
- Has thanked: 3 times
- Been thanked: 1 time
Re: Impey Aqua Dec and Bal WP1
Isn't Aqua deck like Wedi board? If so its a water barrier. Then it only needs the edges and corners.
May be wrong,,that's would I would do.
May be wrong,,that's would I would do.