hi
does anyone know of a free calculator for setting out spindles that works on a mac?
spindle calc
Moderator: Moderators
-
dewaltdisney
- Senior Member
- Posts: 17060
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 820 times
- Been thanked: 3519 times
-
dave.m
- Deceased 07-06-2012 R.I.P
- Posts: 4989
- Joined: Tue Jun 09, 2009 4:30 pm
- Location: A Yorky in Lancashire
- Has thanked: 13 times
- Been thanked: 318 times
Re: spindle calc
Speed,
I could not find any software for a MAC.
There are some for Windows, this is one :
http://www.softpedia.com/get/Science-CA ... ator.shtml
I could not find any software for a MAC.
There are some for Windows, this is one :
http://www.softpedia.com/get/Science-CA ... ator.shtml
You can always tell a Yorkshireman,
But you cannot tell him much.
But you cannot tell him much.
-
big-all
- Pro Carpenter
- Posts: 23591
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 735 times
- Been thanked: 2339 times
Re: spindle calc
do it the easy way spindle size plus 99 then divide the length by the answer
say you have 2.4m to fill with 35mm spindles
35+99=134
2400 div by134=17.9 call that 18
18x 35=630
2400-630=1770
18 spindles =19 spaces
1770 div by 19=93.16 or 93 and 94 every 7th spindle
say you have 2.4m to fill with 35mm spindles
35+99=134
2400 div by134=17.9 call that 18
18x 35=630
2400-630=1770
18 spindles =19 spaces
1770 div by 19=93.16 or 93 and 94 every 7th spindle
we are all ------------------still learning
-
thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times