Over the past couple of days I have been making pine wardrobe doors in the shop. Had the shop set up more like a factory for all this lot:
I am not making the complete wardrobes for these but just the doors which will replace the white MFC that are there already.
Doors, doors and more doors!
Moderator: Moderators
- big-all
- Pro Carpenter
- Posts: 23573
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 734 times
- Been thanked: 2336 times
Re: Doors, doors and more doors!
nice job mailee as always
people don't believe me when i say 10 take twice as long as one because off the setting up
people don't believe me when i say 10 take twice as long as one because off the setting up
we are all ------------------still learning
- rotciv
- Senior Member
- Posts: 853
- Joined: Sat Apr 05, 2008 7:10 pm
- Location: Malta
- Has thanked: 11 times
- Been thanked: 18 times
Re: Doors, doors and more doors!
Great work as always Mailee. Your fingers must be feeling rather raw after sanding those recessed moldings.
Dreams contain the seed of success..... (if you manage to wake up.)
-
- Senior Member
- Posts: 586
- Joined: Thu May 08, 2008 6:49 pm
- Location: N. E. Lincs
- Has thanked: 1 time
- Been thanked: 69 times
Re: Doors, doors and more doors!
Ah, now, that's where I have a few pieces of different diameter dowels so I can sand these more easily. I got fed up of wearing my thumb nails down and rubbing the skin bare so dicided I had to do something about it.
Never enough hours in the day!
http://www.alanwilley.co.uk/
http://www.alanwilley.co.uk/
-
- Senior Member
- Posts: 6620
- Joined: Sun Jan 24, 2010 1:48 pm
- Location: Essex
- Has thanked: 39 times
- Been thanked: 621 times
Re: Doors, doors and more doors!
Busy bee as usual. looking good.
What size is the workshop?
I reckon I could get by with 1000 square feet. So be interesting to know.
What size is the workshop?
I reckon I could get by with 1000 square feet. So be interesting to know.