denzo tape

Tiling questions and answers in here please

Moderator: Moderators

Post Reply
pierre44
Newly registered Member
Posts: 51
Joined: Tue Oct 28, 2008 9:30 pm
Location: London
Has thanked: 5 times
Been thanked: 4 times

denzo tape

Post by pierre44 »

Hi, this might no be the best forum for my question so feel free to move!
I have some copper water pipe covered by rendering, they are wrapped in denzo tape covered with duck tape but some of the (greasy?) stuff is leaching in a couple of spots. My question is what should I do prior to tiling to prevent this from staining the grout in the long run please?
Cheers, Pierre
tictic
Senior Member
Posts: 518
Joined: Fri Sep 25, 2009 6:09 pm
Has thanked: 5 times
Been thanked: 23 times

Re: denzo tape

Post by tictic »

dont thick the carp will be coming from the denso tape mate...probally the duct tape...

if you want you could use a waterproof membrane around this area..dura wp/ditra/homelux etc..there is also the paint on gear from bal..etc..not a great lover of the paint on myself mate..
royaloakcarpentry
Senior Member
Posts: 6620
Joined: Sun Jan 24, 2010 1:48 pm
Location: Essex
Has thanked: 39 times
Been thanked: 621 times

Re: denzo tape

Post by royaloakcarpentry »

Iv'e never had problems with denso, and by the way it doesn't need gaffer tape over it.
User avatar
thescruff
Senior Member
Posts: 49685
Joined: Mon Mar 10, 2008 12:46 am
Location: Bath
Has thanked: 360 times
Been thanked: 3735 times

Re: denzo tape

Post by thescruff »

Most unlikely to be the Denso tape, you don't need anything with it either.

I would look for other problems.

What pipes are they and how are they wrapped.
tictic
Senior Member
Posts: 518
Joined: Fri Sep 25, 2009 6:09 pm
Has thanked: 5 times
Been thanked: 23 times

Re: denzo tape

Post by tictic »

scruff ya think it might be the glue from the duct tape??...thats what am thinking..
User avatar
thescruff
Senior Member
Posts: 49685
Joined: Mon Mar 10, 2008 12:46 am
Location: Bath
Has thanked: 360 times
Been thanked: 3735 times

Re: denzo tape

Post by thescruff »

tictic wrote:scruff ya think it might be the glue from the duct tape??...thats what am thinking..

What glue. :scratch:

It's a gungy mastic.

Whoever invented it didn't like Plumbers. :roll:
tictic
Senior Member
Posts: 518
Joined: Fri Sep 25, 2009 6:09 pm
Has thanked: 5 times
Been thanked: 23 times

Re: denzo tape

Post by tictic »

thescruff wrote:
tictic wrote:scruff ya think it might be the glue from the duct tape??...thats what am thinking..

What glue. :scratch:

It's a gungy mastic.

Whoever invented it didn't like Plumbers. :roll:
:lol: :lol: aye.. all right but am sure you new what i ment.... :B

as for Plumbers.......well i aint going down that road bud...... :B :B ... :wink:
tictic
Senior Member
Posts: 518
Joined: Fri Sep 25, 2009 6:09 pm
Has thanked: 5 times
Been thanked: 23 times

Re: denzo tape

Post by tictic »

ere scruff was on a job the other day....

the Plumber was trying to cut through the pipes(they wern"t copper)...s.s ..i had to show him him to cut through with his jnr h/saw...reverse the blade...lol...

thats why the old school Plumbers hate the germans ...not for the war but what they had to use after the war... :lol: :lol:
User avatar
thescruff
Senior Member
Posts: 49685
Joined: Mon Mar 10, 2008 12:46 am
Location: Bath
Has thanked: 360 times
Been thanked: 3735 times

Re: denzo tape

Post by thescruff »

Most people put the blade in a junior hacksaw in the wrong way. :lol:

The teeth should be facing the hand so you cut on the pull stroke, that way the frame tightens the blade as you cut.
tictic
Senior Member
Posts: 518
Joined: Fri Sep 25, 2009 6:09 pm
Has thanked: 5 times
Been thanked: 23 times

Re: denzo tape

Post by tictic »

had a Plumber working for me once(only the once tho..)

gave him the plans for the wet room....walked in and there was 3 raggles in the bloody wall...

.. :lol: :lol: asked him what the fe c k ....he replied didnt know where the shower was going!!!....enough said.. :lol:

aye.. you all aint all that bad...get a better laugh on the job with Plumbers oon the job ...than them sparks(weird bunch that lot).... :wink:
Post Reply

Return to “Tiling Forum”