- Ultimate Handyman Forum Index Other DIY Computers
- Search
-
- It is currently Mon Dec 30, 2024 6:49 pm
- All times are UTC
It's Arrived!
All your computer hardware and software questions in here please.
Moderator: Moderators
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
Installed iata. whatever it did.
It's like mission control around here at the moment, with 4 computers and 3 remote hard drives on the go, and I'm trying to defragment them so I only have one copy and one backup, some I have 6-7 copies of the same file.
What I'm saying is I can concentrate on you or them if I try both at the same time I shall loose data for sure.
As they will eventually end up in the new computer lets get that sorted first.
It's like mission control around here at the moment, with 4 computers and 3 remote hard drives on the go, and I'm trying to defragment them so I only have one copy and one backup, some I have 6-7 copies of the same file.
What I'm saying is I can concentrate on you or them if I try both at the same time I shall loose data for sure.
As they will eventually end up in the new computer lets get that sorted first.
thescruff
- chat_to_rich
- Senior Member
- Posts: 254
- Joined: Fri Jan 08, 2010 1:46 pm
- Location: Kent
- Has thanked: 0
- Been thanked: 45 times
Re: It's Arrived!
Post by chat_to_rich »
The next step is to turn off the PC and unplug one of the 2TB hard drives. I want you to do this because when we create the RAID 1 array we'll be left with C, the 2TB RAID array and the spare 2TB drive. By disconnecting one of the drives we can identify and label the RAID drive once we've created it.
When you start your PC do you now see an extra screen after the BIOS, but before Windows loads?
The Intel utility is useful for monitoring the health of your disks. You can also use it to create the array from within Windows, which might be easier for you than via the RAID BIOS at startup. It should have added an icon in the system tray. Feel free to open it and have a look.
I'm on the train at the moment, so it may be later tonight, or tomorrow before I can give much more help.
When you start your PC do you now see an extra screen after the BIOS, but before Windows loads?
The Intel utility is useful for monitoring the health of your disks. You can also use it to create the array from within Windows, which might be easier for you than via the RAID BIOS at startup. It should have added an icon in the system tray. Feel free to open it and have a look.
I'm on the train at the moment, so it may be later tonight, or tomorrow before I can give much more help.
chat_to_rich
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
Ok I'll have a poke around.
Didn't notice an extra window, I'll have check on that as well.
There's an intel button in the menu
Didn't notice an extra window, I'll have check on that as well.
There's an intel button in the menu
thescruff
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
Un-plugged drive E, so left with C then D & F with zero on.
When I re-started, it installed, Optiare DVD RW AD 7260S, whatever that is. would it have been on the E drive.
Got some pics showing inside the case if it's any good or of interest.
Never spotted any extra screen when it loaded, but some of it is pretty quite, blink and you miss it.
When I re-started, it installed, Optiare DVD RW AD 7260S, whatever that is. would it have been on the E drive.
Got some pics showing inside the case if it's any good or of interest.
Never spotted any extra screen when it loaded, but some of it is pretty quite, blink and you miss it.
thescruff
-
- Senior Member
- Posts: 7203
- Joined: Mon Apr 13, 2009 7:03 pm
- Has thanked: 419 times
- Been thanked: 900 times
Re: It's Arrived!
It's giving me a headache just following you and your instructions John, god knows what it's doing to you
Dave
gas4you
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
thescruff
- chat_to_rich
- Senior Member
- Posts: 254
- Joined: Fri Jan 08, 2010 1:46 pm
- Location: Kent
- Has thanked: 0
- Been thanked: 45 times
Re: It's Arrived!
Post by chat_to_rich »
The Optiare DVD RW AD 7260S is your DVD drive.
Open the Start Menu, go to Intel -> Intel Rapid Storage Technology. On the screen that opens do you have Status, Create, Manage, Preferences and Help on the top left of the screen?
Open the Start Menu, go to Intel -> Intel Rapid Storage Technology. On the screen that opens do you have Status, Create, Manage, Preferences and Help on the top left of the screen?
chat_to_rich
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
You every tried typing with a egg and bacon sandwich in your hand
Yes it has all them on the bar at the top
Yes it has all them on the bar at the top
thescruff
- chat_to_rich
- Senior Member
- Posts: 254
- Joined: Fri Jan 08, 2010 1:46 pm
- Location: Kent
- Has thanked: 0
- Been thanked: 45 times
Re: It's Arrived!
Post by chat_to_rich »
OK, lets create the array. As a reminder, anything on the two 2TB drives will be lost.
Click Create, choose Real-time data protection (RAID 1), click Next, Tick the checkboxes next to the two 2TB drives and click Next. Click Create Volume. Let me know what happens. I can't do this last step myself.
Click Create, choose Real-time data protection (RAID 1), click Next, Tick the checkboxes next to the two 2TB drives and click Next. Click Create Volume. Let me know what happens. I can't do this last step myself.
chat_to_rich
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
thescruff
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
It says the volume was created successfully.
You still need to partition the new volume using windows disk management before adding data
You still need to partition the new volume using windows disk management before adding data
thescruff
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
Clicked Ok.
Current status, your system is working normally.
Manage.
click on any element in the storage system view to manage it's properties.
Current status, your system is working normally.
Manage.
click on any element in the storage system view to manage it's properties.
thescruff
- chat_to_rich
- Senior Member
- Posts: 254
- Joined: Fri Jan 08, 2010 1:46 pm
- Location: Kent
- Has thanked: 0
- Been thanked: 45 times
Re: It's Arrived!
Post by chat_to_rich »
Click Start, then right click on Computer and choose Manage. Click on Disk Management. In the bottom of the middle pane you should be able to see the RAID volume. If you're prompted to initialise the volume then do so. Post back what you can see.
chat_to_rich
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
Re: It's Arrived!
Storage system view
Array_0000
2 times 1.8 TB with a tick in each.
--------------------------------------------
Internal system disc 119gb with a tick
--------------------------------------------
Internal ATAPI device
---------------------------------------------
Internal empty port 1
-----------------------------------------------
Internal empty port 3
--------------------------------------------
Array_0000
2 times 1.8 TB with a tick in each.
--------------------------------------------
Internal system disc 119gb with a tick
--------------------------------------------
Internal ATAPI device
---------------------------------------------
Internal empty port 1
-----------------------------------------------
Internal empty port 3
--------------------------------------------
thescruff
- thescruff
- Senior Member
- Posts: 49685
- Joined: Mon Mar 10, 2008 12:46 am
- Location: Bath
- Has thanked: 360 times
- Been thanked: 3735 times
thescruff
Jump to
- Ultimate Handyman DIY forum
- ↳ Welcome to the Ultimate Handyman DIY Forum
- WELCOME
- ↳ WELCOME
- ↳ About the forums
- UltimateHandyman Discounts
- ↳ Ultimatehandyman Discounts
- ULTIMATE HANDYMAN COMPETITIONS
- ↳ UHM Forum competitions
- SHOW CASE- A place to show us your work
- ↳ Show Case Gallery
- ↳ Rogues Gallery
- TOOL FORUM
- ↳ Power Tool Reviews
- ↳ Bosch
- ↳ budget power tools
- ↳ Dewalt
- ↳ Festool
- ↳ Hikoki/Hitachi
- ↳ Makita
- ↳ Metabo
- ↳ Milwaukee
- ↳ Ryobi
- ↳ Tool Talk
- ↳ Bargain Tools
- ↳ Hand tool reviews
- ↳ Power Tool Manuals
- ↳ Bosch
- ↳ Dolmar
- ↳ ELEKTRA BECKUM
- ↳ Hitachi
- ↳ Husqvarna
- ↳ Jonsered
- ↳ Makita
- ↳ Stihl
- Other DIY
- ↳ Computers
- ↳ communications and broadband
- ↳ Gardeners World
- ↳ Money Saving
- ↳ Vehicle maintenance & Repair
- ↳ Energy Saving
- DIY Forum/Home improvement
- ↳ General DIY forum
- ↳ Acrylic Forum
- ↳ DIY Disasters
- ↳ Stoves
- ↳ Building Forum
- ↳ Carpentry/Joinery Forum
- ↳ Kitchen Fitting
- ↳ Damp Proofing and Remedial problems
- ↳ Electric Forum UK
- ↳ Lighting
- ↳ Alarm Manuals
- ↳ Painting & Decorating Forum
- ↳ Plastering Forum
- ↳ Plumbing Forum
- ↳ Central Heating & Boilers
- ↳ Boiler Manuals
- ↳ Alpha
- ↳ Ariston
- ↳ ATAG
- ↳ Atmos
- ↳ Baxi
- ↳ Biasi
- ↳ Broag
- ↳ Chaffoteux
- ↳ Ferroli
- ↳ Glow-worm
- ↳ Halstead
- ↳ Ideal
- ↳ Intergas
- ↳ Keston
- ↳ Myson
- ↳ Potterton
- ↳ Protherm
- ↳ Ravenheat
- ↳ Saunier Duval
- ↳ Sime
- ↳ Thorn
- ↳ Vaillant
- ↳ Viessmann
- ↳ Vokera
- ↳ warmflow
- ↳ Worcester Bosch
- ↳ Shower Manuals
- ↳ Tiling Forum
- ↳ Metalworking Forum
- General
- ↳ The Lounge
- ↳ The games corner
- ↳ The Grumpy corner
- ↳ The Sport corner
- ↳ The Cookery corner
- ↳ The Music Corner
- ↳ BUY - SELL - FREE