Howdens do not supply worktops longer than 3m.
Does anywhere know where I can get a 616wide worktop in a 4m length (38mm laminate / black matte), otherwise it looks like the units need cutting down!!
Supplier for 616wide worktop - 4m length
Moderator: Moderators
-
big-all
- Pro Carpenter
- Posts: 23610
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 736 times
- Been thanked: 2341 times
Re: Supplier for 616wide worktop - 4m length
4 metres is not much cheaper than 2x3m could you work with 2 lengths 
we are all ------------------still learning
-
speed
- Senior Member
- Posts: 2594
- Joined: Thu Jan 01, 2009 8:26 pm
- Location: barnsley
- Has thanked: 35 times
- Been thanked: 257 times
Re: Supplier for 616wide worktop - 4m length
id rather cut 5mm off the service void than have a straight join.
are the units ready fitted or is it a new fit? ive fitted 600mm b&poo worktops to howdens units in the past with no problems, i ended up with around 8mm overhang
are the units ready fitted or is it a new fit? ive fitted 600mm b&poo worktops to howdens units in the past with no problems, i ended up with around 8mm overhang
-
cascas
- Newly registered Member
- Posts: 12
- Joined: Thu Oct 06, 2011 11:34 am
- Has thanked: 0
- Been thanked: 0
Re: Supplier for 616wide worktop - 4m length
Units are new and I have just fitted (didnt realise at the time that 616 width was rare). Rather no cut off from the void if I can help it, as I have a 931 corner unit that is tight (no void) as it is.
I have looked at my own kitchen (fitted by a well know local company) and found that the units are also 575, with a 600 worktop - and it looks ok, so tempted by sticking to a 600.
I have looked at my own kitchen (fitted by a well know local company) and found that the units are also 575, with a 600 worktop - and it looks ok, so tempted by sticking to a 600.