Does anyone know a way of operating a 13amp socket from two different locations?
I have networked two computers (1 upstairs and 1 downstairs) and want to be able to switch the modem/router on from either location. The modem/router gets its power from a plugtop transformer so has to be plugged into a 13amp socket.
Any ideas?
Two way switching a 13amp socket(?)
Moderator: Moderators
-
- Senior Member
- Posts: 376
- Joined: Sun Jul 17, 2005 11:38 am
- Location: Newcastle
- Has thanked: 0
- Been thanked: 0
you can get remote switches that may be able to do what you require.
It consists of a component that you plug into the socket and then you plug the electrical item into the component, a bit like a plug in timeswitch, but you get a remote control with it and so you have remote controll of the socket, you can use them on loads of different electricalitems.
Might be worth looking into!
It consists of a component that you plug into the socket and then you plug the electrical item into the component, a bit like a plug in timeswitch, but you get a remote control with it and so you have remote controll of the socket, you can use them on loads of different electricalitems.
Might be worth looking into!
-
- Senior Member
- Posts: 376
- Joined: Sun Jul 17, 2005 11:38 am
- Location: Newcastle
- Has thanked: 0
- Been thanked: 0
-
- Newly registered Member
- Posts: 13
- Joined: Mon Aug 07, 2006 7:16 pm
- Has thanked: 0
- Been thanked: 0
These are the units I've got...
http://www.cyberselect.co.uk/product/469
...and I think I can control them from anywhere in the house. In any case, if the remote control is out-of-range of its transceiver module, they can always be controlled directly from the computer, and that might even be the best way of doing it.
http://www.cyberselect.co.uk/product/469
...and I think I can control them from anywhere in the house. In any case, if the remote control is out-of-range of its transceiver module, they can always be controlled directly from the computer, and that might even be the best way of doing it.
-
- Newly registered Member
- Posts: 96
- Joined: Wed Jan 18, 2006 7:22 pm
- Has thanked: 0
- Been thanked: 0
What a good idea they are!AEG wrote:These are the units I've got...
http://www.cyberselect.co.uk/product/469
...and I think I can control them from anywhere in the house. In any case, if the remote control is out-of-range of its transceiver module, they can always be controlled directly from the computer, and that might even be the best way of doing it.
Thanks for the link AEG, I tink I will be getting a couple of them myself
-
- Newly registered Member
- Posts: 13
- Joined: Mon Aug 07, 2006 7:16 pm
- Has thanked: 0
- Been thanked: 0
If you are seriously thinking of getting one or more of these units and you don't have any already, I would recommend the "X10 Smarthome 7-piece kit"...
http://www.cyberselect.co.uk/product/721
Although this seems quite expensive, you will find that you use all of its contents sooner or later, and it's a good way to get started with home automation. Incidentally, the remote control can also be programmed to operate other devices such as TV, DVD, etc.
http://www.cyberselect.co.uk/product/721
Although this seems quite expensive, you will find that you use all of its contents sooner or later, and it's a good way to get started with home automation. Incidentally, the remote control can also be programmed to operate other devices such as TV, DVD, etc.