Mastic gun opinions
Moderator: Moderators
-
- Senior Member
- Posts: 8711
- Joined: Wed Apr 16, 2008 6:49 pm
- Location: south tyneside
- Has thanked: 32 times
- Been thanked: 805 times
Re: Mastic gun opinions
really? are they like any good? one of my mates has a ryobi one. (tenner bet big all has one too haha) when i fitted his bathroom a while back he looked for it but couldnt remember where he had put it so i didnt have a try.
- big-all
- Pro Carpenter
- Posts: 23577
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 735 times
- Been thanked: 2339 times
Re: Mastic gun opinions
tempted but not enoughfin wrote:really? are they like any good? one of my mates has a ryobi one. (tenner bet big all has one too haha) when i fitted his bathroom a while back he looked for it but couldnt remember where he had put it so i didnt have a try.
if it was a tenner maybe lol
we are all ------------------still learning
-
- Senior Member
- Posts: 205
- Joined: Wed Dec 12, 2012 4:33 pm
- Location: Grimsby
- Has thanked: 58 times
- Been thanked: 12 times
Re: Mastic gun opinions
hi been using a gun for years the best bar none in my opinion is the cox
take full size 400ml tubes
http://www.screwfix.com/p/p-c-cox-easiflow-gun/79714
full metal under a fiver great flow controls, positive stop ,
i always put smear of copper slip on the rod and never have a problem with sticking even after its been wet
last with heavy use 3 to 4 years
tried others just all ways go back to the cox
take full size 400ml tubes
http://www.screwfix.com/p/p-c-cox-easiflow-gun/79714
full metal under a fiver great flow controls, positive stop ,
i always put smear of copper slip on the rod and never have a problem with sticking even after its been wet
last with heavy use 3 to 4 years
tried others just all ways go back to the cox
-
- Senior Member
- Posts: 6620
- Joined: Sun Jan 24, 2010 1:48 pm
- Location: Essex
- Has thanked: 39 times
- Been thanked: 621 times
Re: Mastic gun opinions
As above. Can't beat them. mine has a metal spike on the side that folds out to pierce the foil on gripfill tubes.
had it for donkeys years.
had it for donkeys years.
- Cannyfixit
- Senior Member
- Posts: 2494
- Joined: Sat Dec 15, 2007 7:55 pm
- Location: Cheshire
- Has thanked: 102 times
- Been thanked: 183 times
Re: Mastic gun opinions
Cox for me too,well it was until the brother-in-law borrowed it,this thread has just reminded me to ask him for it back
If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :
http://www.donnasdreamhouse.co.uk/#/ple ... 4529684719
http://www.donnasdreamhouse.co.uk/#/ple ... 4529684719
- ultimatehandyman
- Site Admin
- Posts: 24424
- Joined: Sat Jul 16, 2005 7:06 pm
- Location: Darwen, Lancashire
- Has thanked: 1012 times
- Been thanked: 918 times
Re: Mastic gun opinions
At the last count I had 6 silicone guns and still struggle finding one most of the time!
I have a couple of cox ones but I bought some large tubes of damp proofing cream from a seller on ebay and the kit came with a silicone gun and a drill bit.
The silicone gun is the best I have ever used, It’s an Everbuild power pro, I was so impressed that I bought two more guns. One for the van, one for my workshop and one for my garage
I have a couple of cox ones but I bought some large tubes of damp proofing cream from a seller on ebay and the kit came with a silicone gun and a drill bit.
The silicone gun is the best I have ever used, It’s an Everbuild power pro, I was so impressed that I bought two more guns. One for the van, one for my workshop and one for my garage
- Pooneil
- Senior Member
- Posts: 655
- Joined: Mon May 23, 2011 8:21 pm
- Has thanked: 25 times
- Been thanked: 36 times
Re: Mastic gun opinions
Maybe you could give one to my plasterers as they don't own one... don't carry grab adhesive for corner beads either... or corner beads... don't have any worklights either and certainly not a heater. It's a good job they never turn up up 'cos when they do it costs me a fortune just so they can get on...
it's been a long frustrating day.
it's been a long frustrating day.
When I heard they'd discovered a cure for dyslexia it was like music to my arse!
- Pooneil
- Senior Member
- Posts: 655
- Joined: Mon May 23, 2011 8:21 pm
- Has thanked: 25 times
- Been thanked: 36 times
Re: Mastic gun opinions
Just got me some. They come tomorrow.
Stupid thing is that there is only about a day left for a couple of guys. I haven't paid the others yet and the few tools they did bring are still on site... Their work was good, but I don't know how they make a living.
Stupid thing is that there is only about a day left for a couple of guys. I haven't paid the others yet and the few tools they did bring are still on site... Their work was good, but I don't know how they make a living.
When I heard they'd discovered a cure for dyslexia it was like music to my arse!
-
- Senior Member
- Posts: 8711
- Joined: Wed Apr 16, 2008 6:49 pm
- Location: south tyneside
- Has thanked: 32 times
- Been thanked: 805 times
Re: Mastic gun opinions
plasterers are mad... weve had a smack rat (reformed apparently now living at her majestys pleasure i beleive) he was sh*t hot at plastering though coulda made a fortune if he had his head screwed on propperly. we then had a gambling addict who would turn up or not depending what he had won or lost the day before. then a proppa pure charver man like. he was alright. then a ex army lad who claimed to have been locked up on almost every night out he had ever had.
when we do plastering we normally staple the beads to the boards. works a treat.
when we do plastering we normally staple the beads to the boards. works a treat.
- Job and Knock
- Old School Chippie
- Posts: 6667
- Joined: Mon Sep 12, 2011 3:27 pm
- Has thanked: 742 times
- Been thanked: 1573 times
Re: Mastic gun opinions
Oh so it's not just the jobs I've been on, then? Last year we had the dipso plasterer who had DTs until he'd sneaked out to his van at brew time to oil himself, the team of scousers on a pressure job who'd refuse to do a mix after 3pm (this was a 6 to 7pm site) and so got docked all the time and two, or was it three who came, did the job and went AWOL, uncontactable after a few days to a week leaving their tools behind them. Amazingly all these guys were actually good at their jobs.... Anyone want to buy some secondhand plasterers gear, or tiling stuff (we had some of them, too.....)
"The person who never made a mistake, never made anything" - Albert Einstein
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
- Job and Knock
- Old School Chippie
- Posts: 6667
- Joined: Mon Sep 12, 2011 3:27 pm
- Has thanked: 742 times
- Been thanked: 1573 times
Re: Mastic gun opinions
That's why you keep a cream-cracered Focus DIY special for them..........Alpinist wrote:Cox ones seem to be the best- although you need 2 as one has always been "Borrowed" by the electrician or someone else!
"The person who never made a mistake, never made anything" - Albert Einstein
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
- hemdale
- Newly registered Member
- Posts: 13
- Joined: Tue Oct 01, 2013 6:35 am
- Location: Paris
- Has thanked: 0
- Been thanked: 0
Re: Mastic gun opinions
Hi chaps,
I've bought this one several months ago. Could't be happier !
A bit on the heavy side but it's built like a tank
Tajima Convoy™ Super 100
http://bit.ly/1oUlhL6
I've bought this one several months ago. Could't be happier !
A bit on the heavy side but it's built like a tank
Tajima Convoy™ Super 100
http://bit.ly/1oUlhL6