Hi,
I have watched 'Ultimatehandyman's, 'youtube' video with great enthusiasm. Thank You.
However, I never noticed the Connection Leads which I have being installed?. These are:-
A Multiple set of 4.leads.I believe they come under 'Peripheral Sata'?. The Leads I disconnected from my Recent Broken Down PSU unit came from what looked to be a set connected to the case Front & rear?.. There was 1.Yellow,2. Black,1.Red.These cables ran to a Large connector,as well as a Much smaller one.I got no problem with the Larger connector.ONLY, the smaller one.As I do not really know where it came off of? Can you help Please?
Installation of a PSU
Moderator: Moderators
-
aeromech3
- Senior Member
- Posts: 3598
- Joined: Fri Feb 26, 2010 11:16 am
- Location: Ash Surrey
- Has thanked: 177 times
- Been thanked: 665 times
Re: Installation of a PSU
PSU's come with spare leads to fit a multiple build, I too have a small flat plug left over at the end of a multi power lead with same colours it could be the 4 pin to power to a floppy disc drive.
-
kellys_eye
- Senior Member
- Posts: 12309
- Joined: Mon Mar 15, 2010 11:49 pm
- Location: Oban
- Has thanked: 357 times
- Been thanked: 1790 times
Re: Installation of a PSU
The unused connectors are simpy left disconnected. Tie them out of the way.
- These users thanked the author kellys_eye for the post:
- Nobby01
- Rating: 7.14%
Don't take it personally......
