Makita 9401 belt sander - parts not listed

[luke knight]

Trying to find parts for a makita 9401 belt sander.

I've seen the exploded parts diagram on alot of websites, but they do not show or list the two brass ferrels which hold the drive roller.

These seem to be prone to heavy wear so I'm suprised they're not shown, though maybe I have an older model (only 9401 on label).

On the exploded diagram these parts should be inserted in the main frame between parts 69 and 50!

If anyone could help, or even suggest where i could get a few of these machined on the cheap would be a great help.

p.s. diagram http://www.powertoolspares.com/tool/mak ... 01/spares/#

[TheToolStore]

Hi Luke,
If the problem still exist, I'd like to suggest to call us, as an approved Makita service probably one of my colleagues 'll be able to help you.
our number:Contact details removed. Mod 2. and contact us.

[moderator2]

The tool.

Members are only allowed to promote themselves after making 100 posts offering help and advice.
Check out the Forum Rules before attempting to promote your company Forum Rules, read them all but especially the section entitled 'Self Promoting Links'
The contact details (including those in your avatar) that you posted has been removed, consider this to be a final warning until you have made 100 useful posts.

Admin & Mods

[TheToolStore]

The tool.

Members are only allowed to promote themselves after making 100 posts offering help and advice.
Check out the Forum Rules before attempting to promote your company, read them all but especially the section entitled 'Self Promoting Links'
The contact details (including those in your avatar) that you posted has been removed, consider this to be a final warning until you have made 100 useful posts.

Admin & Mods

I read the rules, came back to edit the post, but you've been the faster.

Btw, my colleague in the shop could'be help he is dealing with theese things on daily basis, but as there is no chance to give any details, not even in PM.. I just feel sorry.

[moderator2]

I read the rules, came back to edit the post, but you've been the faster.

Btw, my colleague in the shop could'be help he is dealing with these things on daily basis, but as there is no chance to give any details, not even in PM.. I just feel sorry.

One of the disadvantages of being one of the most popular DIY Forums on the Web is that we attract Spammers from all over the world.

For this reason alone we have to have rules, in the same way as any society.

Unfortunately, well intentioned as your post was, it fell foul of our rules.

I hope that you will stick around and help with a few tool related posts. The 100 post limit can easily be reached at which point you'll be allowed to add a signature/link to your business.

[TheToolStore]

I read the rules, came back to edit the post, but you've been the faster.

Btw, my colleague in the shop could'be help he is dealing with these things on daily basis, but as there is no chance to give any details, not even in PM.. I just feel sorry.

One of the disadvantages of being one of the most popular DIY Forums on the Web is that we attract Spammers from all over the world.

For this reason alone we have to have rules, in the same way as any society.

Unfortunately, well intentioned as your post was, it fell foul of our rules.

I hope that you will stick around and help with a few tool related posts. The 100 post limit can easily be reached at which point you'll be allowed to add a signature/link to your business.

If it was really for helping there is no way to... anyway.. I won't complain. :)
is the new avatar acceptable? :)

could you just delete the last few post.. it seems to be a bit off...
sorry4it, and thx.