Tilling my bathroom floor

Tiling questions and answers in here please

Moderator: Moderators

Post Reply
andy216
Newly registered Member
Posts: 32
Joined: Sat Jun 16, 2012 1:39 pm
Has thanked: 3 times
Been thanked: 0

Tilling my bathroom floor

Post by andy216 »

Afternoon all,

Just got a question, I have just bought a house with carpet in all bathrooms. I want tile all the floors I know I have to ply board the upstairs floors. My question is should I tile around the sink pedestal & toilet or remove them?

Cheers in advance.

Andy
User avatar
DTWCeramics
Senior Member
Posts: 385
Joined: Thu Apr 12, 2012 3:35 pm
Location: Portsmouth
Has thanked: 13 times
Been thanked: 43 times

Re: Tilling my bathroom floor

Post by DTWCeramics »

Personally I would tile the floor, and place sanitaryware on top of this.

Cheers to you too!

Matt :thumbleft:
Matt
andy216
Newly registered Member
Posts: 32
Joined: Sat Jun 16, 2012 1:39 pm
Has thanked: 3 times
Been thanked: 0

Re: Tilling my bathroom floor

Post by andy216 »

Thanks for your fast response, if I tile the floors and place the sanitary ware back on top surely I will have to adjust the basin height on the wall and toilet waste pipe??
royaloakcarpentry
Senior Member
Posts: 6620
Joined: Sun Jan 24, 2010 1:48 pm
Location: Essex
Has thanked: 39 times
Been thanked: 621 times

Re: Tilling my bathroom floor

Post by royaloakcarpentry »

Why are they carpeted................might be that there is too much flex in the floor for tiling.

make sure any flex issues are dealt with otherwise you will have a failure of grout/adhesive bond or cracked tiles.
andy216
Newly registered Member
Posts: 32
Joined: Sat Jun 16, 2012 1:39 pm
Has thanked: 3 times
Been thanked: 0

Re: Tilling my bathroom floor

Post by andy216 »

I think it's been carpeted as a cost saver, all the other houses in my road are the same. I will do a flex test prior to plying the floor and after I have pled the floor. see if any movement.
royaloakcarpentry
Senior Member
Posts: 6620
Joined: Sun Jan 24, 2010 1:48 pm
Location: Essex
Has thanked: 39 times
Been thanked: 621 times

Re: Tilling my bathroom floor

Post by royaloakcarpentry »

15mm ply is what you need.
andy216
Newly registered Member
Posts: 32
Joined: Sat Jun 16, 2012 1:39 pm
Has thanked: 3 times
Been thanked: 0

Re: Tilling my bathroom floor

Post by andy216 »

Great, thanks for the advise I will check over the weekend and make a start.
Post Reply

Return to “Tiling Forum”