Impey Aqua Dec and Bal WP1

Tiling questions and answers in here please

Moderator: Moderators

Post Reply
goldfish_memory
Newly registered Member
Posts: 18
Joined: Wed Nov 04, 2009 2:34 pm
Has thanked: 0
Been thanked: 0

Impey Aqua Dec and Bal WP1

Post by goldfish_memory »

Hello knowledgeable chaps,

I've got an aqua dec installed and ready to waterproof, I've got a Bal WP1 kit to do it.

My question is, should I just go ahead and tank the aqua dec as if it was any other bit of floor? (Primer, Tanking, Membrane, Tanking) or do I need to do something special?

Cheers,
GM
royaloakcarpentry
Senior Member
Posts: 6620
Joined: Sun Jan 24, 2010 1:48 pm
Location: Essex
Has thanked: 39 times
Been thanked: 621 times

Re: Impey Aqua Dec and Bal WP1

Post by royaloakcarpentry »

If it works on same principle as the system I use which is Impey, then it will be treated same as rest of floor. Instructions should point you in the right direction for that particular system though.
User avatar
Simon Site Manager
Senior Member
Posts: 3399
Joined: Tue Oct 27, 2009 8:55 pm
Location: St Helens Merseyside
Has thanked: 48 times
Been thanked: 202 times

Re: Impey Aqua Dec and Bal WP1

Post by Simon Site Manager »

Hi Goldfish,

Impey have a very good website!

S
Measure twice, cut once!
smontaigue
Newly registered Member
Posts: 1
Joined: Fri Feb 21, 2014 4:13 am
Has thanked: 0
Been thanked: 0

Re: Impey Aqua Dec and Bal WP1

Post by smontaigue »

Hi, I just wondered whether using the BAL WP1 directly on top of the aqua dec was successful ?
Russkirk77
Newly registered Member
Posts: 9
Joined: Fri Feb 14, 2014 8:56 am
Location: London
Has thanked: 3 times
Been thanked: 1 time

Re: Impey Aqua Dec and Bal WP1

Post by Russkirk77 »

Isn't Aqua deck like Wedi board? If so its a water barrier. Then it only needs the edges and corners.
May be wrong,,that's would I would do.
Post Reply

Return to “Tiling Forum”