Mouse
Moderator: Moderators
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
Mouse
My mouse seems to be getting a bit long in the tooth.
The main problem being that the scroll wheel is not always responding fully to my efforts.
Ebay has new ones exactly the same (suits me) for £6.00.
Is there a simple fix for a dodgy scroll wheel or do I just buy a new mouse - I think I can run to £6 without starving myself.
If it makes any difference, it's a Logitech M-SBF96.
The main problem being that the scroll wheel is not always responding fully to my efforts.
Ebay has new ones exactly the same (suits me) for £6.00.
Is there a simple fix for a dodgy scroll wheel or do I just buy a new mouse - I think I can run to £6 without starving myself.
If it makes any difference, it's a Logitech M-SBF96.
One day it will all be firewood.
- kellys_eye
- Senior Member
- Posts: 12309
- Joined: Mon Mar 15, 2010 11:49 pm
- Location: Oban
- Has thanked: 357 times
- Been thanked: 1790 times
Re: Mouse
Scroll wheels operate via a slotted disk arrangement and they quickly pick up hair, fibres etc that interfere with the light beam and interrupt operation. It's easy to take one apart and scrape/clean the mechanism and the difference it makes is often remarkable.
Don't take it personally......
-
- Senior Member
- Posts: 4764
- Joined: Sun Jan 31, 2010 9:21 pm
- Location: Kent, Land of Apples and PYO
- Has thanked: 100 times
- Been thanked: 876 times
Re: Mouse
yep there optical, back in the day when mice had balls the rollers and optics always got fouled up, usual its 4 screws unless its cheap it clipped together job
a mouse is something you use all the time, so getting a decent mouse to suit your hand(s) is a big factor I tend to go for the Microsoft optical wheel mouse - not the basic one but the one that is weighted other alternatives are a Logitech tracker ball or a touchpad
a mouse is something you use all the time, so getting a decent mouse to suit your hand(s) is a big factor I tend to go for the Microsoft optical wheel mouse - not the basic one but the one that is weighted other alternatives are a Logitech tracker ball or a touchpad
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
Re: Mouse
Does that apply to an optical mouse, or are you thinking of an older type?kellys_eye wrote:Scroll wheels operate via a slotted disk arrangement and they quickly pick up hair, fibres etc that interfere with the light beam and interrupt operation. It's easy to take one apart and scrape/clean the mechanism and the difference it makes is often remarkable.
I can remember cleaning little rubber balls on daily basis, but this mouse is well over 5 years old and apart from blowing the odd hair of the bottom of it it's not been a problem so far.
Would cleaning it require the PC to be off and mouse unplugged?
One day it will all be firewood.
- BillyGoat
- Troll Headbutter
- Posts: 8071
- Joined: Sat Jan 01, 2011 8:20 pm
- Location: On top of a mountain, in the long grass.
- Has thanked: 386 times
- Been thanked: 796 times
Re: Mouse
I just buy new ones
WEll, when I say buy........
On my desktop, I've got a Logitech MX510 - best mouse I've EVER owned. I think the MX518 replaced it......ignore the gamer part, it's just SO comfey to use all day. Love it and I'll be sad when it dies.
BG
WEll, when I say buy........
On my desktop, I've got a Logitech MX510 - best mouse I've EVER owned. I think the MX518 replaced it......ignore the gamer part, it's just SO comfey to use all day. Love it and I'll be sad when it dies.
BG
Arguing with a woman is like reading a Software Licence Agreement.
In the end, you ignore everything and click "I agree".
In the end, you ignore everything and click "I agree".
-
- Senior Member
- Posts: 4764
- Joined: Sun Jan 31, 2010 9:21 pm
- Location: Kent, Land of Apples and PYO
- Has thanked: 100 times
- Been thanked: 876 times
Re: Mouse
The early mice used rollers for direction this was on a shaft, the other end had a slotted disc with a ir sender and a receiver the other side of this disc as you rolled the mouse the light pulses where translated electrical pulses, technically they where "optical"
- kellys_eye
- Senior Member
- Posts: 12309
- Joined: Mon Mar 15, 2010 11:49 pm
- Location: Oban
- Has thanked: 357 times
- Been thanked: 1790 times
Re: Mouse
The sh1t still gets in through the wheel slot even if yours is an optical mouse. I get 'fond' of the mouse (and keyboard for that matter) and would rather clean/repair a dodgy one than have to get used to the peculiarities of a new one (even if they only take a few minutes to adapt to ).
Plus I'm a cheapskate.......
Plus I'm a cheapskate.......
Don't take it personally......
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
Re: Mouse
I'll take a screwdriver to it before I lash out the £6.00 then.kellys_eye wrote:The sh1t still gets in through the wheel slot even if yours is an optical mouse. I get 'fond' of the mouse (and keyboard for that matter) and would rather clean/repair a dodgy one than have to get used to the peculiarities of a new one (even if they only take a few minutes to adapt to ).
Plus I'm a cheapskate.......
Is it safe to do it "live", or should I disconnect everything?
One day it will all be firewood.
- kellys_eye
- Senior Member
- Posts: 12309
- Joined: Mon Mar 15, 2010 11:49 pm
- Location: Oban
- Has thanked: 357 times
- Been thanked: 1790 times
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
Re: Mouse
I spoke to my nipper who said I might struggle to get it all back together again so I splashed out the £6.00 for a new one: it's plugged in now and the dory is completely hunky again.
Now I can take the old one apart and play.
Now I can take the old one apart and play.
One day it will all be firewood.
- BillyGoat
- Troll Headbutter
- Posts: 8071
- Joined: Sat Jan 01, 2011 8:20 pm
- Location: On top of a mountain, in the long grass.
- Has thanked: 386 times
- Been thanked: 796 times
Re: Mouse
Speaking of mice....saw this on HotUKDeals: http://www.ebay.co.uk/itm/310792260381? ... 6448297101
3 quid for a wired mouse....not too shabby
3 quid for a wired mouse....not too shabby
Arguing with a woman is like reading a Software Licence Agreement.
In the end, you ignore everything and click "I agree".
In the end, you ignore everything and click "I agree".
-
- Mr. Grumpy
- Posts: 3193
- Joined: Tue Nov 18, 2008 3:41 pm
- Has thanked: 25 times
- Been thanked: 109 times
Re: Mouse
I bought the Logitech M525 and K750 keyboards. Fantastic. Battery on mouse lasts for long long time, very responsive. Keyboard is wireless solar powered, requires hardly any light, sturdy but exceptionally thin. Both can use the one nano receiver, has a long range which is great when watching a movie so can put keyboard beside you for stop/start etc
Only downside is price, dear me not cheap
Only downside is price, dear me not cheap
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
Re: Mouse
He knows nothing that boy!!ayjay wrote:I spoke to my nipper who said I might struggle to get it all back together again
I could make a fur coat for a mouse from the fluff inside it though.
I just wanted a like for like replacement, I'm not into change, that mouse does all I want, comfortably, and only £6.00. That's easily less than £1 per year. What's not to like?DIY_Johnny wrote:I bought the Logitech M525 and K750 keyboards. Fantastic. Battery on mouse lasts for long long time, very responsive. Keyboard is wireless solar powered, requires hardly any light, sturdy but exceptionally thin. Both can use the one nano receiver, has a long range which is great when watching a movie so can put keyboard beside you for stop/start etc
Only downside is price, dear me not cheap
One day it will all be firewood.