Sliding Table

geoffg · Post by **geoffg** » Thu Dec 13, 2007 3:29 pm

Could someone please tell me what the small hook / peg is called which holds the two halves of a sliding table together. And where can I get some to replace my broken ones.
Cheers in anticipation of the Xmas dinner not disappearing down the gap in the centre of the table
geoff

Bespoke Cabinet Maker · Thu Dec 13, 2007 4:54 pm

Hi Geoff

It may help if you post a photo of what parts are remaining to help with the identification.

But you could just use a toggle clip available from the big sheds and little sheds.

Or it could just be a wooden dowel what you are looking for again the big and small sheds.

Alan

geoffg · Post by **geoffg** » Fri Dec 14, 2007 10:00 am

Cheers Alan,
It's just a flat hook that swivels on a screw and hooks on to a screw on the other half of the table
geoff

dewaltdisney · Post by **dewaltdisney** » Fri Dec 14, 2007 11:31 am

Have a look at Issac Lord

This is what you might need http://www.isaaclord.co.uk/productDetai ... subCat=000

It might need countersinking though

DWD

geoffg · Post by **geoffg** » Fri Dec 14, 2007 3:23 pm

Cheers DWD,
Couldn't find what I wanted, so I had a look round B&Q and got some toggle clips. Now fitted and working superbly
cheers again for the replies
geoff