Mastic gun opinions

[steviejoiner74]

Cox mastic gun for me,the best guns by far.

[Job and Knock]

+1 on the Cox Powerflow gun:

Cox Powerflow caulking gun.jpg (10.23 KiB) Viewed 8223 times

Widely available, affordable (£17 to £19), but widely copied. Often badly. If it doesn't say "Cox" on the gun, then it isn't, so don't buy it! Mine is now about 3 years old. Oh, did I mention that it's British?

[182michael]

Mine has just stop working! Same as above. Pushing the trigger but the rod doesn't push

Wonder if they have a warranty lol

[Job and Knock]

You do need to clean them from time to time - and scrape the rust off the rod/sand off with some alox scratch

[big-all]

yes a course file or sandpaper works on solo clamps as well

[Dickie]

Another vote for Cox here, best guns around. The only problem with silicone guns is the site magpie..........

[fin]

cox for me too. just a standard one like. got me name written on it too. got sick of a decent gun dissapearing and a runbbish one being left instead decorators speciallity is that

[Dickie]

I just bought the Everbuild one from Amazon for £2.55. It's good value & good quality.
I just don't want any more Cox guns nicked........

[Blakey]

I have three of these, AK3803 SEALEY CAULKING GUN, must be 5yrs old and still going strong.

[Siobhan_R]

This is the best gun I've EVER used, its solid as can be, nice and cheap and has 3 plunger rods, it's quite heavy but you can feel the quality, I think the only thing that would bend or break it would be if I ran over it with the van...

http://www.screwfix.com/p/no-nonsense-h ... 00ml/28862

[Chop]

That's the one I have, I got tired of the welds cracking on the cheaper ones and as you say that's pretty tough.