Dekton tools?

This forum is for reviews of Budget power tools such as B&Q / Wickes own brand, Direct power / Titan / challenge / Performance power / Erbauer / Skill/ Bosch Green / Black & Decker

Moderator: Moderators

TPT.50
Newly registered Member
Posts: 16
Joined: Wed Oct 28, 2009 12:28 pm
Location: England
Has thanked: 1 time
Been thanked: 3 times

Dekton tools?

Post by TPT.50 »

Hi, anyone out there ever heard of/used Dekton tools? and yes that is Dekton, not the more popular Tekton, can't seem to find any history or feedback on these cheap but good looking tool's, I would be very interested in any comment's/feedback you have to offer,

Thank's, Tony.
Rorschach
Senior Member
Posts: 5375
Joined: Wed Feb 26, 2014 9:35 pm
Has thanked: 108 times
Been thanked: 1038 times

Re: Dekton tools?

Post by Rorschach »

I've seen them about. Look similar to Rolson/Blakspur etc, in fact aside from colour some of the tools are identical even down to the packaging. I have bought a couple of bits and for the money they were ok, perfect for a one off job/backup.
These users thanked the author Rorschach for the post:
TPT.50
Rating: 7.14%
fin
Senior Member
Posts: 8711
Joined: Wed Apr 16, 2008 6:49 pm
Location: south tyneside
Has thanked: 32 times
Been thanked: 805 times

Re: Dekton tools?

Post by fin »

never heard of dekton or tekton.... but then again im trade so i deal with top end stuff. so do the majority of the lads i know
TPT.50
Newly registered Member
Posts: 16
Joined: Wed Oct 28, 2009 12:28 pm
Location: England
Has thanked: 1 time
Been thanked: 3 times

Re: Dekton tools?

Post by TPT.50 »

I'm also trade (45 years) but Dekton were a name I heard mentioned by a fellow trader for possible "single use only" while on site, ie tape measures etc, I don't know about you but I can't afford to keep replacing my best gear just because some thieving little runt takes a shine to my possesions.
DmitriKara
Senior Member
Posts: 129
Joined: Tue Jan 05, 2016 8:30 am
Location: London
Has thanked: 58 times
Been thanked: 18 times

Re: Dekton tools?

Post by DmitriKara »

at first it felt like one of those chinese copies, but it turned out to be a well established uk brand
User avatar
Job and Knock
Old School Chippie
Posts: 6667
Joined: Mon Sep 12, 2011 3:27 pm
Has thanked: 742 times
Been thanked: 1573 times

Re: Dekton tools?

Post by Job and Knock »

DmitriKara wrote:at first it felt like one of those chinese copies, but it turned out to be a well established uk brand
No, you were right first time - it IS a firm selling cheap Chinese copies......
These users thanked the author Job and Knock for the post:
DmitriKara
Rating: 7.14%
"The person who never made a mistake, never made anything" - Albert Einstein

"I too will something make, And joy in the making" - Robert Bridges, 1844~1930

"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
TPT.50
Newly registered Member
Posts: 16
Joined: Wed Oct 28, 2009 12:28 pm
Location: England
Has thanked: 1 time
Been thanked: 3 times

Re: Dekton tools?

Post by TPT.50 »

Job & Knock, yes but my original question was are they any good as "one use" throwaway jobbies? as I am sick of so called pro's on the job who can't keep their thieving hand's too themselves too the point where I only use the majority of my good gear on private jobs?

Tony.
DmitriKara
Senior Member
Posts: 129
Joined: Tue Jan 05, 2016 8:30 am
Location: London
Has thanked: 58 times
Been thanked: 18 times

Re: Dekton tools?

Post by DmitriKara »

Job and Knock wrote:
DmitriKara wrote:at first it felt like one of those chinese copies, but it turned out to be a well established uk brand
No, you were right first time - it IS a firm selling cheap Chinese copies......

I've never understood how could people fall for the same trick over and over again.. It's the same with clothing, although power tools are Waaay more dangerous... Risky chinese products are definitely not my cup of tea.
TPT.50
Newly registered Member
Posts: 16
Joined: Wed Oct 28, 2009 12:28 pm
Location: England
Has thanked: 1 time
Been thanked: 3 times

Re: Dekton tools?

Post by TPT.50 »

I agree, but we're only talking tape measures, craft knives, screw boxes etc, the small stuff that usually "goes walkies" on site, tool snobbery doesn't come into it when they fancy your gear they think might come in handy that you've only left for a minute or two, and why does it seem accepted when your gear goes missing, all I hear is "its your own fault for leaving it unattended"? they should have their fingers chopped off, THEFT IS THEFT, if you steal other peoples property YOUR A THIEF.
User avatar
ayjay
Senior Member
Posts: 9891
Joined: Wed Nov 17, 2010 5:51 pm
Has thanked: 458 times
Been thanked: 1708 times

Re: Dekton tools?

Post by ayjay »

TPT.50 wrote:.......................why does it seem accepted when your gear goes missing, all I hear is "its your own fault for leaving it unattended"? they should have their fingers chopped off, THEFT IS THEFT, if you steal other peoples property YOUR A THIEF.
I wouldn't stop at their fingers!

But it is your fault to some extent, you know they exist, don't give them the opportunity and you'll still have your tools.

In 50 years a chippie:

Stolen: all my Jennings pattern Ridgeway auger bits from 1/4 to 1/2 in 1/16ths (he left the larger sizes) - I know who it was, couldn't prove it, my fault, I even showed him where I stashed my tools at night, (I was young, I learnt from that and never again left my tool on-site).

Stolen: My expensive Stabila level, mistakenly left behind a door one holiday weekend, (my fault), I know who it was but couldn't prove it, stolen by the labourer who was sacked that Friday - he came back and nicked only builders stuff - all of the house-owners stuff was untouched.

I've been fortunate that I've never had my van turned over, but also cautious about where I park, even turning down many jobs because of a lack of sensible parking. I've met others who are into double figures for the number of times they've had everything of value removed from their vans - to me that sounds careless rather than unlucky.
One day it will all be firewood.
jape
BANNED
Posts: 698
Joined: Fri Jul 10, 2015 5:29 am
Has thanked: 125 times
Been thanked: 115 times

Re: Dekton tools?

Post by jape »

I agree with the finger-chopping but reckon the best way is three times caught and you are hung. Once for paedophiles, twice for assault, burglary etc, three times for light theft. We won't need jails or screws (many are bent). The chopping and hanging should be in public and their organs donated to science.
Dave54
Senior Member
Posts: 5063
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1300 times
Been thanked: 1175 times

Re: Dekton tools?

Post by Dave54 »

ayjay wrote:
TPT.50 wrote:.......................why does it seem accepted when your gear goes missing, all I hear is "its your own fault for leaving it unattended"? they should have their fingers chopped off, THEFT IS THEFT, if you steal other peoples property YOUR A THIEF.
- I know who it was, couldn't prove it, my fault, -
And that's nearly always the problem. You know exactly who it is, but there's no chance of proving it. ::b

And even if you could, what then? These days it'd be you who was in the wrong if you did anything in retribution, but of course the police wouldn't do anything about the theft either. No win as usual.

"They" will nick stuff whether it's cheap or not given the opportunity. If I had to work on site now, I think I'd go down the route of roughly spraying anything likely to likely to get lifted with a bright fluorescent colour. Make it less shiny for the magpies.

As a complete aside, a bit of a mystery. I had some good friends who were on holiday down here in my workshop showing them what I was working on. Afterwards a small home-made gauge had disappeared off the bench. Nothing really, of no value except a few minutes to make. Did they take it? I'll never know, but if they did. Why?
Dave54
Senior Member
Posts: 5063
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1300 times
Been thanked: 1175 times

Re: Dekton tools?

Post by Dave54 »

jape wrote:I agree with the finger-chopping but reckon the best way is three times caught and you are hung. Once for paedophiles, twice for assault, burglary etc, three times for light theft. We won't need jails or screws (many are bent). The chopping and hanging should be in public and their organs donated to science.
There'd be no begger left in some places. . . ! :lol:
User avatar
Argyll
Senior Member
Posts: 6145
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 1180 times
Been thanked: 576 times

Re: Dekton tools?

Post by Argyll »

jape wrote:We won't need jails or screws (many are bent).
Are they? What experience do you have of jails?
User avatar
steviejoiner74
Senior Member
Posts: 8005
Joined: Sun Aug 18, 2013 7:04 pm
Location: Fife
Has thanked: 747 times
Been thanked: 1616 times

Re: Dekton tools?

Post by steviejoiner74 »

Argyll wrote:
jape wrote:We won't need jails or screws (many are bent).
Are they? What experience do you have of jails?
It's not the tooth fairy that brings in all the drugs,mobile phones etc is it?
The ITV program on wermwood scrubs interviewed loads of cons who said it was 500 quid a package the screws charged,and there was loads of them willing to take gear in.
Inmates openly smoking dope on camera that the screws turned a blind eye to. The list goes on.
These users thanked the author steviejoiner74 for the post:
jape
Rating: 7.14%
Carpentry,I can explain it to you but I cannot understand it for you.
Locked

Return to “budget power tools ”