How to fit a light switch

This is where you can post pictures of extremely poor workmanship, whether it is done by a dodgy tradesman or by an incompetent DIY'er. Instructions on how to post pictures can be found in here.

Moderator: Moderators

idkhow2diy
Senior Member
Posts: 246
Joined: Sun Jan 10, 2016 8:37 pm
Has thanked: 43 times
Been thanked: 27 times

How to fit a light switch

Post by idkhow2diy »

switch.jpg
switch.jpg (78.61 KiB) Viewed 11295 times
Spotted this in our eldest's uni digs for this year - the light it switches doesn't work either...
User avatar
Gadget
Jack Of All Trades
Posts: 7998
Joined: Sun Dec 18, 2005 9:23 pm
Location: Whitley Bay
Has thanked: 344 times
Been thanked: 342 times

Re: How to fit a light switch

Post by Gadget »

That's terrible, it's not level... :lol:
By eck! ©
1johnk1
Newly registered Member
Posts: 11
Joined: Mon Sep 05, 2016 6:19 am
Has thanked: 7 times
Been thanked: 0

Re: How to fit a light switch

Post by 1johnk1 »

Are there any wires in the box
idkhow2diy
Senior Member
Posts: 246
Joined: Sun Jan 10, 2016 8:37 pm
Has thanked: 43 times
Been thanked: 27 times

Re: How to fit a light switch

Post by idkhow2diy »

It's a 2-way at the top of the stairs. There are wires, but the light does not work. I've checked for volts and the circuit works fine, but no volts at the light fitting. The wires in the ceiling rose are all there and tights, but no volts. Not mine to touch of course, but it does make the stairs very dark and the landlords agent has been told about this already.

The landlord lives away, leaving management to the agent, and also I suspect the whole of the construction. The house was gutted, so why on earth they could not get this right defeats me!
JPS3691
Newly registered Member
Posts: 22
Joined: Thu Jul 21, 2016 4:59 pm
Has thanked: 22 times
Been thanked: 1 time

Re: How to fit a light switch

Post by JPS3691 »

Again another example of extremely cheapskate landlords making a fortune for little investment because they know that people will need the accommodation.

I very much expect that they would not tolerate this level of "workmanship" (used in the very loosest of sense of the word) in the properties that they live in.
idkhow2diy
Senior Member
Posts: 246
Joined: Sun Jan 10, 2016 8:37 pm
Has thanked: 43 times
Been thanked: 27 times

Re: How to fit a light switch

Post by idkhow2diy »

Tell me about it. No fix yet and my lad called tonight to complain the bed fell apart and it is so dark with no landing light he has to leave everything else on or fall down the steep stairs.

I dunno but I couldn't do that to anyone. I let a house to a family and put 12k into the place before they moved in. It's our house at the end of the day and is an asset so I want it to be right whoever resides there.
Rorschach
Senior Member
Posts: 5375
Joined: Wed Feb 26, 2014 9:35 pm
Has thanked: 107 times
Been thanked: 1038 times

Re: How to fit a light switch

Post by Rorschach »

Buy your lad a torch :lol:
idkhow2diy
Senior Member
Posts: 246
Joined: Sun Jan 10, 2016 8:37 pm
Has thanked: 43 times
Been thanked: 27 times

Re: How to fit a light switch

Post by idkhow2diy »

Yeah - he's using one of those head torch things!
User avatar
chrrris
Senior Member
Posts: 1902
Joined: Mon Jan 12, 2015 6:42 pm
Has thanked: 234 times
Been thanked: 410 times

Re: How to fit a light switch

Post by chrrris »

When we moved into our place, nearly 20 years ago, the bedroom had a dimmer switch fitted snug up against the architrave at a right angle to the door. All very romantic and atmospheric, obvs. Except that the rotary switch stood about 3/4" proud of the backplate, which itself was a good 1/2" proud of the wall. The door wouldn't shut because it was hitting the switch, so the previous occupant "solved" this by cutting a big 1" wide notch out of the door for it to close around the dimmer switch.
Haste is the enemy of quality.
DmitriKara
Senior Member
Posts: 129
Joined: Tue Jan 05, 2016 8:30 am
Location: London
Has thanked: 58 times
Been thanked: 18 times

Re: How to fit a light switch

Post by DmitriKara »

I think I'm developing a sense of love/humor for absurd workmanship. this is actually sort of silly cute :huray: quite unfortunate for the residents tho..
idkhow2diy
Senior Member
Posts: 246
Joined: Sun Jan 10, 2016 8:37 pm
Has thanked: 43 times
Been thanked: 27 times

Re: How to fit a light switch

Post by idkhow2diy »

Finally they fixed the lights a couple of days ago - apparently involved wiring in the roof space.
stevegrass777
Newly registered Member
Posts: 63
Joined: Fri Feb 26, 2016 2:02 pm
Has thanked: 3 times
Been thanked: 11 times

Re: How to fit a light switch

Post by stevegrass777 »

JPS3691 wrote:Again another example of extremely cheapskate landlords making a fortune for little investment because they know that people will need the accommodation.

I very much expect that they would not tolerate this level of "workmanship" (used in the very loosest of sense of the word) in the properties that they live in.
Or you could look at it a bit differently the landlord might be getting ripped off by the agent and the contractors,by paying top money for shoddy work because the agent takes advantage of the fact the landlord is away.
Its very common for the agents to take regular payment for getting stuff sorted and not actually doing anything,but it's always the landlords fault.And changing a bulb can end up being £150.
High rental prices are a symptom of high property prices mainly,most landlords make 5-6% less fees and maintenance for the deposit part they have in the property,for the bit they borrow they earn 5-6% less interest of 1-3% it's hardly making out like a bandit,for that they have probably risked £20,000 plus of hard earned money.
These users thanked the author stevegrass777 for the post:
BillyGoat
Rating: 7.14%
Pat68
Newly registered Member
Posts: 8
Joined: Fri Dec 09, 2016 12:41 pm
Has thanked: 1 time
Been thanked: 0

Re: How to fit a light switch

Post by Pat68 »

Looks a bit like something I'd do. Should he have used a smaller plastic panel?
User avatar
BillyGoat
Troll Headbutter
Posts: 8071
Joined: Sat Jan 01, 2011 8:20 pm
Location: On top of a mountain, in the long grass.
Has thanked: 386 times
Been thanked: 796 times

Re: How to fit a light switch

Post by BillyGoat »

stevegrass777 wrote:
JPS3691 wrote:Again another example of extremely cheapskate landlords making a fortune for little investment because they know that people will need the accommodation.

I very much expect that they would not tolerate this level of "workmanship" (used in the very loosest of sense of the word) in the properties that they live in.
Or you could look at it a bit differently the landlord might be getting ripped off by the agent and the contractors,by paying top money for shoddy work because the agent takes advantage of the fact the landlord is away.
Its very common for the agents to take regular payment for getting stuff sorted and not actually doing anything,but it's always the landlords fault.And changing a bulb can end up being £150.
High rental prices are a symptom of high property prices mainly,most landlords make 5-6% less fees and maintenance for the deposit part they have in the property,for the bit they borrow they earn 5-6% less interest of 1-3% it's hardly making out like a bandit,for that they have probably risked £20,000 plus of hard earned money.

My parents let their house out via an agent and explicity said to be informed if any work was going to be carried out. Apparently a double glazed unit handle "fell off" and needed repairing URGENTLY (three other windows in the room and a door) and they got charged nearly £300 quid by the letting agents "window guy". No dispute possible.
Arguing with a woman is like reading a Software Licence Agreement.
In the end, you ignore everything and click "I agree".
User avatar
wine~o
Senior Member
Posts: 26265
Joined: Sat Jan 10, 2009 3:49 pm
Location: hants/dorset border
Has thanked: 1414 times
Been thanked: 4015 times

Re: How to fit a light switch

Post by wine~o »

BillyGoat wrote:

My parents let their house out via an agent and explicity said to be informed if any work was going to be carried out. Apparently a double glazed unit handle "fell off" and needed repairing URGENTLY (three other windows in the room and a door) and they got charged nearly £300 quid by the letting agents "window guy". No dispute possible.
:angryfire: :angryfire: Replacement handle probably a tenner anywhere. Time to fit ? anything from 10 minutes to an hour (10 minutes if it broke in the open position; longer if it broke whilst locked shut)

Handyman price (Mine) £40 .. F3cking robbing bastardsss
Verwood Handyman

_____________________________________________________________________________

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk
Post Reply

Return to “Rogues Gallery”