lidl diy from sunday 22/1/17

The Bargain Tool forum. This is for regular members to post about bargain tools. It is not for spammers to post links to tool sites!

Moderator: Moderators

Post Reply
User avatar
big-all
Pro Carpenter
Posts: 23610
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 736 times
Been thanked: 2341 times

lidl diy from sunday 22/1/17

Post by big-all »

we are all ------------------still learning
blackvenom
Senior Member
Posts: 128
Joined: Mon Feb 10, 2014 5:51 am
Location: Lancashire
Has thanked: 8 times
Been thanked: 8 times

Re: lidl diy from sunday 22/1/17

Post by blackvenom »

Always fancied a Dremel type tool. No idea what I would use it for though [emoji23]


Sent from my iPhone using Tapatalk
User avatar
big-all
Pro Carpenter
Posts: 23610
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 736 times
Been thanked: 2341 times

Re: lidl diy from sunday 22/1/17

Post by big-all »

i have the bosch blue version cost about £80 naked[no battery/charger or kit]so less than £30 for a complete kit [£17]and iff you also buy the 250 bit box[£12] as well :lol:
we are all ------------------still learning
User avatar
Job and Knock
Old School Chippie
Posts: 6667
Joined: Mon Sep 12, 2011 3:27 pm
Has thanked: 742 times
Been thanked: 1573 times

Re: lidl diy from sunday 22/1/17

Post by Job and Knock »

blackvenom wrote:Always fancied a Dremel type tool. No idea what I would use it for though [emoji23]
I thought the same, but in the last year I've:

- altered the keeps on several doors which had ben incorrectly fitted (i.e. new lock, old keep, so the lock mortise didn't fit)
- cut the tops off two Spit cordless batteries carefuly so that they could be recelled
- cut back a really awkward RSJ flange so that we could get stone slips installed (because an angle grinder would have destroyed the lead-clad oriel window next to the RSJ - and in any cas we couldn't get even a 4-1/2in angle grinder close enough). This took a lot of cutting wheels, but saved having to take-out and replace a £10k windowm unit to correct a complee cock-up
- ground a blob off the bottom of a ceramic vase so that it would stand up straight
- cut new screw slots in damaged screw heads so we could remove antique brassware from old doors for re-use on new doors

And that was just the start, with a basic Dremel kit. Once you have one you'll keep finding things it can do, really

Sent from my laptop using my fingers :mrgreen:
"The person who never made a mistake, never made anything" - Albert Einstein

"I too will something make, And joy in the making" - Robert Bridges, 1844~1930

"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
Dave54
Senior Member
Posts: 5063
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1300 times
Been thanked: 1175 times

Re: lidl diy from sunday 22/1/17

Post by Dave54 »

:withstupid: Bought mine years back to make a bit of carving that had to be repeated on some chairs easier, but it's been used for loads of stuff. Get the big kit of tooling for it. The small diamond burrs are useful too.
User avatar
wine~o
Senior Member
Posts: 26293
Joined: Sat Jan 10, 2009 3:49 pm
Location: hants/dorset border
Has thanked: 1415 times
Been thanked: 4024 times

Re: lidl diy from sunday 22/1/17

Post by wine~o »

:dunno: 12 Volt though.. Is that going to have any go ??
Verwood Handyman

_____________________________________________________________________________

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk
User avatar
big-all
Pro Carpenter
Posts: 23610
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 736 times
Been thanked: 2341 times

Re: lidl diy from sunday 22/1/17

Post by big-all »

its actually 10.8[3x3.6v cells] the bosch one is great so no reason the lidle one wont do well at the price the tools are very small remember 1/8" and 1/16" shaft [3.175mm/1.5875mm]
we are all ------------------still learning
User avatar
Argyll
Senior Member
Posts: 6176
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 1183 times
Been thanked: 581 times

Re: lidl diy from sunday 22/1/17

Post by Argyll »

I bought the Dremel type tool last year. It’s been pretty handy as I’ve used it to engrave a couple of things and I repaired an expensive pair of sunglasses which broke half way up one of the arms. I drilled a very small hole in both sides and glued in a small plastic rod to act as an internal splint.

I’m reluctant now to buy any power tools from Lidl. I think their power tools are very good for DIY/light trade use but their pricing structure for additional batteries is disproportionate to the cost of the power tool. Plus the fact if you wish to upgrade the Ah of the battery you need often need to buy another charger. This happened to me last month when I wanted to purchase an additional battery for my Parkside impact driver :cussing: :cussing: :cussing:
Rorschach
Senior Member
Posts: 5380
Joined: Wed Feb 26, 2014 9:35 pm
Has thanked: 109 times
Been thanked: 1038 times

Re: lidl diy from sunday 22/1/17

Post by Rorschach »

Personally I try and avoid their cordless tools unless it really is an amazing deal, in which case I treat it as a short term tool knowing the chance of replacement or spare batteries is almost nil. Don't hesitate on the corded tools though.
blackvenom
Senior Member
Posts: 128
Joined: Mon Feb 10, 2014 5:51 am
Location: Lancashire
Has thanked: 8 times
Been thanked: 8 times

Re: lidl diy from sunday 22/1/17

Post by blackvenom »

Looks like I'll be investing in a Dremel sometime soon then [emoji1360]


Sent from my iPhone using Tapatalk
Post Reply

Return to “Bargain Tools”