Jig Saw

All tool questions and recommendations or complaints in this forum please

Moderator: Moderators

Post Reply
doug29
Newly registered Member
Posts: 65
Joined: Fri Jan 18, 2008 9:04 pm
Has thanked: 39 times
Been thanked: 0

Jig Saw

Post by doug29 »

What am I looking for when buying a jig saw for occasional use?

Does anybody know of any good deals at the moment?

Thanks
User avatar
Gadget
Jack Of All Trades
Posts: 8004
Joined: Sun Dec 18, 2005 9:23 pm
Location: Whitley Bay
Has thanked: 344 times
Been thanked: 342 times

Post by Gadget »

I saw them in 'No Frills' for £25 the other day!
By eck! ©
doug29
Newly registered Member
Posts: 65
Joined: Fri Jan 18, 2008 9:04 pm
Has thanked: 39 times
Been thanked: 0

Post by doug29 »

What's 'No Frills'?
User avatar
Gadget
Jack Of All Trades
Posts: 8004
Joined: Sun Dec 18, 2005 9:23 pm
Location: Whitley Bay
Has thanked: 344 times
Been thanked: 342 times

Post by Gadget »

Cheapo B&Q type store!
By eck! ©
The Weegie
Senior Member
Posts: 1793
Joined: Mon Aug 27, 2007 3:37 pm
Location: Glasgow
Has thanked: 7 times
Been thanked: 21 times

Post by The Weegie »

Hi Doug, If you are willing to spend around 30 - 50 pounds then I would recommend the Ryobi 600 normally just under £50. You will get cheaper makes of jigsaw but I have always found Ryobi to be good for diy use.
chippymike
Senior Member
Posts: 398
Joined: Fri Dec 28, 2007 3:10 pm
Location: Milton Keynes
Has thanked: 16 times
Been thanked: 9 times

Post by chippymike »

id say go for a ryobi or green bosch as all the others will be terrible for cutting a good square edge
doug29
Newly registered Member
Posts: 65
Joined: Fri Jan 18, 2008 9:04 pm
Has thanked: 39 times
Been thanked: 0

Post by doug29 »

I had a look at the Ryobi EJS-600QEO as recommended by The Weegie :thumbright:
£50 delivered from Screwfix.
mikey2
Newly registered Member
Posts: 25
Joined: Wed Mar 05, 2008 11:04 am
Location: surrey
Has thanked: 0
Been thanked: 0

Post by mikey2 »

is that the ryobi +1 range. i always hated ryobi but after using a friends tools i was quite impressed
Post Reply

Return to “Tool Talk”