Mouldy Bath Tub Plastic Silcone Seal Trim

Tiling questions and answers in here please

Moderator: Moderators

Post Reply
Bobsy671
Newly registered Member
Posts: 40
Joined: Mon Feb 10, 2014 9:24 pm
Has thanked: 0
Been thanked: 0

Mouldy Bath Tub Plastic Silcone Seal Trim

Post by Bobsy671 »

I've got 2 baths where the triangle shaped plastic trim has lots of mould around the silicone seal.
Looks similar to the one in B and Q below.

https://www.diy.com/departments/dia...a ... ms_S_BSA_D

I've tackled the 1 bath and cleaned up the silicone. So now I'm not sure what to do. During the clearing up some of the plastic trim has come away from the tiled wall. I could just try and fill up the small gaps with silicone and seal the rest of the trim with silicone, or perhaps I could pull off the old plastic trim and re-attach, or perhaps buy new and start over.

Any recommendations much appreciated.
User avatar
Someone-Else
Senior Member
Posts: 14572
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2556 times

Re: Mouldy Bath Tub Plastic Silcone Seal Trim

Post by Someone-Else »

Buy a new trim, quicker, easier, less hassle.
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
dewaltdisney
Senior Member
Posts: 16937
Joined: Fri Jan 20, 2006 5:51 pm
Location: Essex
Has thanked: 807 times
Been thanked: 3496 times

Re: Mouldy Bath Tub Plastic Silcone Seal Trim

Post by dewaltdisney »

Buy some of this https://www.screwfix.com/p/unibond-sili ... 00ml/75756 and strip it back clean.Then put some new trim and reseal as suggested by SE. :thumbright:

DWD
Post Reply

Return to “Tiling Forum”