- Ultimate Handyman Forum Index Other DIY Vehicle maintenance & Repair
- Search
-
- It is currently Sat Feb 22, 2025 10:16 pm
- All times are UTC
2004 Nissan Primera stalling after high revs
Vehicle maintenance and repair questions in here please for all questions relating to Cars, Vans etc.
Moderator: Moderators
-
- Newly registered Member
- Posts: 5
- Joined: Wed Oct 17, 2018 3:05 pm
- Has thanked: 1 time
- Been thanked: 0
2004 Nissan Primera stalling after high revs
Post by Fletcherl9 »
Hi, I am hoping someone can shed some light on the problem I am having...
My 2.0 petrol Primera is stalling after high revs, usually when stopping at junctions etc.
Today when parked up I reved the engine up and when the revs came back down it cut out, however if I only rev up to 2500 rpm it returns to idling no problem.
Any help would be much appreciated.
My 2.0 petrol Primera is stalling after high revs, usually when stopping at junctions etc.
Today when parked up I reved the engine up and when the revs came back down it cut out, however if I only rev up to 2500 rpm it returns to idling no problem.
Any help would be much appreciated.
Fletcherl9
-
- Newly registered Member
- Posts: 5
- Joined: Wed Oct 17, 2018 3:05 pm
- Has thanked: 1 time
- Been thanked: 0
Re: 2004 Nissan Primera stalling after high revs
Post by Fletcherl9 »
Just a quick update, it only does this when the engine is at temperature, it is fine when it’s cold
Fletcherl9
-
- Senior Member
- Posts: 4774
- Joined: Sun Jan 31, 2010 9:21 pm
- Location: Kent, Land of Apples and PYO
- Has thanked: 105 times
- Been thanked: 880 times
Re: 2004 Nissan Primera stalling after high revs
what Year ? is it the SR20 (P11) ? or later QR20 (P12)
ICV (idle control valve) or throttle body - I would carefully clean the throttle body with carb cleaner,
Not 100% sure but depending on year it may use a MAF (mass airflow meter) I would check it with a scan tool to see what its reading
ICV (idle control valve) or throttle body - I would carefully clean the throttle body with carb cleaner,
Not 100% sure but depending on year it may use a MAF (mass airflow meter) I would check it with a scan tool to see what its reading
- These users thanked the author Bob225 for the post:
- Fletcherl9
- Rating: 7.14%
Bob225
-
- Newly registered Member
- Posts: 5
- Joined: Wed Oct 17, 2018 3:05 pm
- Has thanked: 1 time
- Been thanked: 0
Re: 2004 Nissan Primera stalling after high revs
Post by Fletcherl9 »
2004 p12, I will try cleaning the throttle body... fingers crossedBob225 wrote:what Year ? is it the SR20 (P11) ? or later QR20 (P12)
ICV (idle control valve) or throttle body - I would carefully clean the throttle body with carb cleaner,
Not 100% sure but depending on year it may use a MAF (mass airflow meter) I would check it with a scan tool to see what its reading
Thanks
Fletcherl9
- kellys_eye
- Senior Member
- Posts: 12309
- Joined: Mon Mar 15, 2010 11:49 pm
- Location: Oban
- Has thanked: 357 times
- Been thanked: 1790 times
Re: 2004 Nissan Primera stalling after high revs
Post by kellys_eye »
Stop 'revving it' - what purpose does doing it achieve? Just turn the engine off.
It's akin to 'my head hurts' - 'so stop banging it against a wall then!'
It's akin to 'my head hurts' - 'so stop banging it against a wall then!'
Don't take it personally......
kellys_eye
-
- Senior Member
- Posts: 4774
- Joined: Sun Jan 31, 2010 9:21 pm
- Location: Kent, Land of Apples and PYO
- Has thanked: 105 times
- Been thanked: 880 times
Re: 2004 Nissan Primera stalling after high revs
04 it will have a TB and MAF, it may have a code logged in the ecu but not may not put the money light on
Bob225
-
- Newly registered Member
- Posts: 5
- Joined: Wed Oct 17, 2018 3:05 pm
- Has thanked: 1 time
- Been thanked: 0
Re: 2004 Nissan Primera stalling after high revs
Post by Fletcherl9 »
It happens intermittently when I stop at junctions or lights, I had a suspicion that it only happened if I was at higher rpm before I stopped, I reved it when I was parked to confirm that this was the case. In future it might be worth only posting on a topic if you have something of use or constructive to say.kellys_eye wrote:Stop 'revving it' - what purpose does doing it achieve? Just turn the engine off.
It's akin to 'my head hurts' - 'so stop banging it against a wall then!'
Fletcherl9
-
- Newly registered Member
- Posts: 5
- Joined: Wed Oct 17, 2018 3:05 pm
- Has thanked: 1 time
- Been thanked: 0
Re: 2004 Nissan Primera stalling after high revs
Post by Fletcherl9 »
Cleaned the throttle body and it’s working perfectly, thank you for the help. This 30 minute job saved me an expensive trip to the garage.Bob225 wrote:what Year ? is it the SR20 (P11) ? or later QR20 (P12)
ICV (idle control valve) or throttle body - I would carefully clean the throttle body with carb cleaner,
Not 100% sure but depending on year it may use a MAF (mass airflow meter) I would check it with a scan tool to see what its reading
Thanks again
Fletcherl9
Return to “Vehicle maintenance & Repair”
Jump to
- Ultimate Handyman DIY forum
- ↳ Welcome to the Ultimate Handyman DIY Forum
- WELCOME
- ↳ WELCOME
- ↳ About the forums
- UltimateHandyman Discounts
- ↳ Ultimatehandyman Discounts
- ULTIMATE HANDYMAN COMPETITIONS
- ↳ UHM Forum competitions
- SHOW CASE- A place to show us your work
- ↳ Show Case Gallery
- ↳ Rogues Gallery
- TOOL FORUM
- ↳ Power Tool Reviews
- ↳ Bosch
- ↳ budget power tools
- ↳ Dewalt
- ↳ Festool
- ↳ Hikoki/Hitachi
- ↳ Makita
- ↳ Metabo
- ↳ Milwaukee
- ↳ Ryobi
- ↳ Tool Talk
- ↳ Bargain Tools
- ↳ Hand tool reviews
- ↳ Power Tool Manuals
- ↳ Bosch
- ↳ Dolmar
- ↳ ELEKTRA BECKUM
- ↳ Hitachi
- ↳ Husqvarna
- ↳ Jonsered
- ↳ Makita
- ↳ Stihl
- Other DIY
- ↳ Computers
- ↳ communications and broadband
- ↳ Gardeners World
- ↳ Money Saving
- ↳ Vehicle maintenance & Repair
- ↳ Energy Saving
- DIY Forum/Home improvement
- ↳ General DIY forum
- ↳ Acrylic Forum
- ↳ DIY Disasters
- ↳ Stoves
- ↳ Building Forum
- ↳ Carpentry/Joinery Forum
- ↳ Kitchen Fitting
- ↳ Damp Proofing and Remedial problems
- ↳ Electric Forum UK
- ↳ Lighting
- ↳ Alarm Manuals
- ↳ Painting & Decorating Forum
- ↳ Plastering Forum
- ↳ Plumbing Forum
- ↳ Central Heating & Boilers
- ↳ Boiler Manuals
- ↳ Alpha
- ↳ Ariston
- ↳ ATAG
- ↳ Atmos
- ↳ Baxi
- ↳ Biasi
- ↳ Broag
- ↳ Chaffoteux
- ↳ Ferroli
- ↳ Glow-worm
- ↳ Halstead
- ↳ Ideal
- ↳ Intergas
- ↳ Keston
- ↳ Myson
- ↳ Potterton
- ↳ Protherm
- ↳ Ravenheat
- ↳ Saunier Duval
- ↳ Sime
- ↳ Thorn
- ↳ Vaillant
- ↳ Viessmann
- ↳ Vokera
- ↳ warmflow
- ↳ Worcester Bosch
- ↳ Shower Manuals
- ↳ Tiling Forum
- ↳ Metalworking Forum
- General
- ↳ The Lounge
- ↳ The games corner
- ↳ The Grumpy corner
- ↳ The Sport corner
- ↳ The Cookery corner
- ↳ The Music Corner
- ↳ BUY - SELL - FREE