Perspex sheet to tiles

[bgatty68]

Hi guys I’m putting a Perspex sheet over wall tiles and wondered if anyone could recommend a non solvent adhesive to use as I know on most adhesives it says one of the surfaces must be porous?? Please help

[Rorschach]

Silicone

[London mike 61]

We had to do the same in a rental property and the adhesive was supplied as part of the deal and it was similar to this https://www.toolstation.com/soudal-fix- ... 0ml/p84704
It is quite thick to squeeze out so you will need a decent caulking gun like this https://www.toolstation.com/cox-powerfl ... gun/p66651
And don’t be mean with the adhesive!!
And for what it’s worth , 2 tips
1. Measure twice ( at least ) and cut once
2. Offer the panels up for a dry fit before applying adhesive

Mike

[bgatty68]

London Mike
Did you use this on perspex as the guy where I bought it on ebay has said make sure I use a non-solvent adhesive?

[London mike 61]

This is their spec and it does seem to fit what you want

http://www.soudal.com/soudalweb/product ... 82&ID=1907

Mike

[bgatty68]

London Mike,
Ok thanks for that

[wine~o]

What colour (if any) is the perspex ?

[bgatty68]

Wine o it’s black why

[wine~o]

Wine o it’s black why

Coz if it had been clear or translucent then the sealants linked to above would have shown through.

I try to be thorough

[bgatty68]

Wine o so you think it should be ok?

[wine~o]

Wine o so you think it should be ok?

Should be, personally I'd use CT1 or Geocel the works (Both available in clear) but those are just my prefered adhesives.

[bgatty68]

Wine o so you think it should be ok?

Should be, personally I'd use CT1 or Geocel the works (Both available in clear) but those are just my prefered adhesives.

Are they non solvent though?

[London mike 61]

If you have concerns about the adhesive showing through ( it shouldn’t ) then use something like this

https://www.toolstation.com/sticks-like-290ml/p98810

And the data sheet

https://www.dvakim.com/wp-content/uploa ... ZE0449.pdf

Mike

[Rorschach]

I really would just recommend a bog standard silicone for this. It sticks well to tiles and perspex but could be removed if you needed to in the future without damage.