ffx 10% off till 6am 4/9/2019
Moderator: Moderators
- big-all
- Pro Carpenter
- Posts: 23570
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 734 times
- Been thanked: 2335 times
-
- Senior Member
- Posts: 4806
- Joined: Thu Apr 14, 2011 6:33 pm
- Location: Dundee, Scotland.
- Has thanked: 855 times
- Been thanked: 994 times
ffx 10% off till 6am 4/9/2019
Ha. I was just trying it and I eventually read the fine print (not that fine really) on the email. It applies on spend between £50-100, and I what I wanted is not as much, :-(
- big-all
- Pro Carpenter
- Posts: 23570
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 734 times
- Been thanked: 2335 times
ffx 10% off till 6am 4/9/2019
it actually says maximum discount £100 so £1000 worth for £900
- Rating: 7.14%
we are all ------------------still learning
-
- Senior Member
- Posts: 4806
- Joined: Thu Apr 14, 2011 6:33 pm
- Location: Dundee, Scotland.
- Has thanked: 855 times
- Been thanked: 994 times
ffx 10% off till 6am 4/9/2019
FFS. I don't like you anymore
You are correct! Minimum spend £50, maximum discount £100, limit 2 purchases per customer. Still, I am too tight to spend £50 as I can't think of anything I need.
You are correct! Minimum spend £50, maximum discount £100, limit 2 purchases per customer. Still, I am too tight to spend £50 as I can't think of anything I need.
- big-all
- Pro Carpenter
- Posts: 23570
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 734 times
- Been thanked: 2335 times
ffx 10% off till 6am 4/9/2019
trying to work out what new power tool i dont need i should not buy or buy as i havent bought a new power tool for nearing a year now
we are all ------------------still learning
-
- Senior Member
- Posts: 4806
- Joined: Thu Apr 14, 2011 6:33 pm
- Location: Dundee, Scotland.
- Has thanked: 855 times
- Been thanked: 994 times
ffx 10% off till 6am 4/9/2019
Battery powered circular saw? You could cut sheets of ply/mdf at the suppliers and stick them in the car?
[Been there done that, it is still in the box and for all I know it does not work].
[Been there done that, it is still in the box and for all I know it does not work].
- big-all
- Pro Carpenter
- Posts: 23570
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 734 times
- Been thanked: 2335 times
ffx 10% off till 6am 4/9/2019
as a supposed carpenter its embarassing how many battery saws i have
if you exclude recip/jigsaw/osscilating saws and only count the ones that rotate i have 2 track saw an 18 and 54v i also have a 12v bosch mini saw that will cut about an inch
i had a dewalt dw62 a very old 24v bosch and two old ryobi one plus circ saw but gave them away as i never used them
we are all ------------------still learning
- Argyll
- Senior Member
- Posts: 6145
- Joined: Wed Sep 10, 2008 3:58 pm
- Has thanked: 1180 times
- Been thanked: 576 times
ffx 10% off till 6am 4/9/2019
I would also check their Ebay page before buying. A lot of the time it's cheaper than their own site.
-
- Senior Member
- Posts: 4806
- Joined: Thu Apr 14, 2011 6:33 pm
- Location: Dundee, Scotland.
- Has thanked: 855 times
- Been thanked: 994 times
ffx 10% off till 6am 4/9/2019
Strange that. I often found stuff on their ebay page, and then cheaper direct from their shop. Usually though I am after hand tools that do not cost that much and there are no special offers for them as for powertools.
- big-all
- Pro Carpenter
- Posts: 23570
- Joined: Sat Dec 16, 2006 10:11 pm
- Location: redhill surrey an auld reekie laddie
- Has thanked: 734 times
- Been thanked: 2335 times
ffx 10% off till 6am 4/9/2019
i have always found most cheaper direct from ffx butttt
i dont do social media or advertizing from any source so suspect like any company they will have a campaign
where they may sell say specific makita below others prices or indeed drop most prices for a campaign and say something like "cheapest on ebay "
to give the impression off best value then creep prices up
i dont do social media or advertizing from any source so suspect like any company they will have a campaign
where they may sell say specific makita below others prices or indeed drop most prices for a campaign and say something like "cheapest on ebay "
to give the impression off best value then creep prices up
we are all ------------------still learning
- Argyll
- Senior Member
- Posts: 6145
- Joined: Wed Sep 10, 2008 3:58 pm
- Has thanked: 1180 times
- Been thanked: 576 times
ffx 10% off till 6am 4/9/2019
Maybe I'm getting that back to front then
But I bought a Makita track saw from their Ebay site last month for £200. I'm pretty sure it was a bit more on their website. That could just have been a one off.
But I bought a Makita track saw from their Ebay site last month for £200. I'm pretty sure it was a bit more on their website. That could just have been a one off.
- Argyll
- Senior Member
- Posts: 6145
- Joined: Wed Sep 10, 2008 3:58 pm
- Has thanked: 1180 times
- Been thanked: 576 times
ffx 10% off till 6am 4/9/2019
It was £206 from FFX Ebay and £256 from FFX direct.
viewtopic.php?f=27&t=98583
It must have been a one off.
viewtopic.php?f=27&t=98583
It must have been a one off.
-
- Senior Member
- Posts: 4806
- Joined: Thu Apr 14, 2011 6:33 pm
- Location: Dundee, Scotland.
- Has thanked: 855 times
- Been thanked: 994 times
ffx 10% off till 6am 4/9/2019
I think we discussed it at the time (or I followed up your point). Ebay had a promotion with some good discounting probably funded by the sellers. Usually, FFX is cheaper direct with free delivery, basically their cheaper prices are probably the difference of what they would have paid to Ebay. Anyway I like the company and if the price is right I would rather cut out the middleman.Argyll wrote: ↑Tue Sep 03, 2019 3:10 pm It was £206 from FFX Ebay and £256 from FFX direct.
viewtopic.php?f=27&t=98583
It must have been a one off.