Hi, can anyone tell me where the two brown wires go in the face plate, Com, L1 or L2
Many thanks
Loose light switch wires
Moderator: Moderators
-
- Senior Member
- Posts: 5380
- Joined: Wed Feb 26, 2014 9:35 pm
- Has thanked: 109 times
- Been thanked: 1038 times
- Someone-Else
- Senior Member
- Posts: 14709
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Loose light switch wires
It's because we don't know.
Believe it or not, there is nothing that says "This wire will go in THAT terminal" and as they are all the same colour it makes it worse.
However all we can do is guess.
the two browns in com and the single brown in L1
Believe it or not, there is nothing that says "This wire will go in THAT terminal" and as they are all the same colour it makes it worse.
However all we can do is guess.
the two browns in com and the single brown in L1
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section