Saucepan drawer cage fixings

Verns63 · Post by **Verns63** » Thu Nov 05, 2020 1:22 pm

So these fixings are obviously broken and need replacing. They're from an old MFI kitchen saucepan drawer; they hold a metal cage to the base of the drawer. I'd like to source replacements so I can fix the drawer... does anyone out there have any idea what they might be called and/or where I might be able to get them from?

dewaltdisney · Post by **dewaltdisney** » Thu Nov 05, 2020 2:09 pm

Would a plastic cable grip clip do it?

DWD

Dave54 · Post by **Dave54** » Thu Nov 05, 2020 3:41 pm

Several plastic washers stacked together?

ayjay · Post by **ayjay** » Thu Nov 05, 2020 4:38 pm

Are they the base fittings for Pan Drawer Rails? (they look familiar, without me venturing out to the garage to check)

: pan drawer rails.jpg (48.44 KiB) Viewed 3183 times

Bob225 · Post by **Bob225** » Thu Nov 05, 2020 7:23 pm

Is it a pull out rack and the door mounts to the front ?

eg. https://www.rejsltd.co.uk/product/pull- ... ant-multi/

Only thing that springs to mind is metal p-clips

Bob225 · Post by **Bob225** » Thu Nov 05, 2020 7:55 pm

What size are the basket rods ? Something like a closed terry clip may work

Better idea - Cable tie eyelet and a cable tie

EG. https://www.ebay.co.uk/itm/Cable-Tie-Ey ... SwPEFbpjcs

Verns63 · Post by **Verns63** » Fri Nov 06, 2020 9:31 am

They're for fixing a "cage" to the base of the drawer, ayjay... I think I'm going to try some cable ties with some cable tie bases instead of the fixings to see if they work. Frustratingly I just can't find the actual item anywhere...

Appreciate your reply.

: DSC_0222.JPG (153 KiB) Viewed 3162 times

Verns63 · Post by **Verns63** » Fri Nov 06, 2020 9:33 am

Bob225 wrote: ↑Thu Nov 05, 2020 7:23 pm Is it a pull out rack and the door mounts to the front ?

Only thing that springs to mind is metal p-clips

Yes, Bob225. The drawer front goes onto the open end of this photo... I'm going to try some cable ties and cable tie bases... thanks for your reply.

: DSC_0222.JPG (153 KiB) Viewed 3161 times

dewaltdisney · Post by **dewaltdisney** » Fri Nov 06, 2020 9:40 am

This is what I meant https://www.screwfix.com/p/tower-coaxia ... -100/18471

DWD