Hi everyone,
I recently bought a lamp and am confused by the wattage label (see image). It reads:
Max 4W for LED; Max 8W for CFL, Max 18W for Halogen. On the website it also says Max 25W for incandescent bulb.
I thought that lamps only had one Watt rating and that it applied to any type of light bulb.... Therefore if I'm correct, could I not use a LED of up to 25W? (In practice I would use a LED of around 10W as that provides sufficient lumens).
I am hoping that the Watt numbers for LED, CFL and Halogen are shown because they would provide the lumens equivalent of a 25W incandescent bulb, rather than because bulbs of higher wattage would damage the lamp.
Grateful for your help explaining the label!
Best wishes
Leanne
Lamp wattage
Moderator: Moderators
-
- Newly registered Member
- Posts: 1
- Joined: Fri Nov 06, 2020 1:11 pm
- Has thanked: 0
- Been thanked: 0
- Someone-Else
- Senior Member
- Posts: 14709
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Lamp wattage
Usually the rating of a light fitting is such because of the heat the actual lamp gives off, so a halogen will give off more heat than an LED lamp, so why they have specified it that way round, who knows.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
- kellys_eye
- Senior Member
- Posts: 12309
- Joined: Mon Mar 15, 2010 11:49 pm
- Location: Oban
- Has thanked: 357 times
- Been thanked: 1790 times
Lamp wattage
There's no rhyme nor reason to those numbers - in fact I'd say they were 'upside down'. You could use any LED in there without issue as an 18W version would be like a searchlight......
Don't take it personally......
-
- Senior Member
- Posts: 5380
- Joined: Wed Feb 26, 2014 9:35 pm
- Has thanked: 109 times
- Been thanked: 1038 times
- Someone-Else
- Senior Member
- Posts: 14709
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Lamp wattage
I was going to say that.
As I said, the ratings are regarding how much heat the light fitting can "handle" before damage occurs, it does seem odd that they say only a low wattage LED lamp can be used, when a higher wattage halogen gives off more heat.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section