I have three switches for the landing light to replace and one is an intermediate switch. I bought a replacement but it's labelled differently. Anyone know how to wire this intermediate switch?
Here are the two switches
https://photos.app.goo*gl/mhf66Whzydr3qJnCA
(Replace the * with a .)
Anyone know how to wire this intermediate switch?
Moderator: Moderators
-
Someone-Else
- Senior Member
- Posts: 14709
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Anyone know how to wire this intermediate switch?
Your link does not work.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section
-
ericmark
- Senior Member
- Posts: 4276
- Joined: Tue May 10, 2011 2:43 am
- Location: Mid Wales
- Has thanked: 118 times
- Been thanked: 783 times
Anyone know how to wire this intermediate switch?
1 = L1 and 2 = L2 so basic no change. There is a add files option, why mess around with photos on another site?
-
Gobshite
- Newly registered Member
- Posts: 8
- Joined: Sun Jan 31, 2021 9:31 am
- Has thanked: 1 time
- Been thanked: 0
Anyone know how to wire this intermediate switch?
Ummm I noticed the 1s are opposite sides of the old switch but L1s are side by side on the new switch?
Does it matter which 1 goes to which L1?
Does it matter which 1 goes to which L1?
-
Someone-Else
- Senior Member
- Posts: 14709
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Anyone know how to wire this intermediate switch?
Nope.
The easiest way is to swap them over as they are now, so the pair at the top stay at the top, which means the pair at the bottom stay at the bottom.
The easiest way is to swap them over as they are now, so the pair at the top stay at the top, which means the pair at the bottom stay at the bottom.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section
-
Gobshite
- Newly registered Member
- Posts: 8
- Joined: Sun Jan 31, 2021 9:31 am
- Has thanked: 1 time
- Been thanked: 0
Anyone know how to wire this intermediate switch?
Nope can't do that. As I said from the pictures. 'the pair at the top' of the original of switch are 1 and 2, 'the pair at the top' of the new switch are L1 and L1. So unless you can talk in those terms, I'm not confident you have seen the photos
Someone-Else wrote: ↑Thu Feb 25, 2021 4:31 pm Nope.
The easiest way is to swap them over as they are now, so the pair at the top stay at the top, which means the pair at the bottom stay at the bottom.
- Attachments
-
- IMG_20210224_105842.jpg (240.81 KiB) Viewed 1561 times
-
- IMG_20210224_105543.jpg (211.07 KiB) Viewed 1561 times
-
Someone-Else
- Senior Member
- Posts: 14709
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Anyone know how to wire this intermediate switch?
Trust me.
The pair at the top stay at the top, and the pair at the bottom stay at the bottom. What is hard in that? It does not matter what the terminals are called on a light switch, they could be called Tom, Dick, Harry and Dave, it matters not, what does matter is the ones at the top stay at the top............which means the ones at the bottom stay at the bottom.
(Nice clear in focus pictures too, pity they are upside down)
The pair at the top stay at the top, and the pair at the bottom stay at the bottom. What is hard in that? It does not matter what the terminals are called on a light switch, they could be called Tom, Dick, Harry and Dave, it matters not, what does matter is the ones at the top stay at the top............which means the ones at the bottom stay at the bottom.
(Nice clear in focus pictures too, pity they are upside down)
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section
-
OnlyMe
- Approved Electrician
- Posts: 3120
- Joined: Sun Apr 24, 2011 6:01 pm
- Location: South Yorkshire
- Has thanked: 225 times
- Been thanked: 662 times
Anyone know how to wire this intermediate switch?
Is the correct answerSomeone-Else wrote: ↑Fri Feb 26, 2021 6:21 pm The pair at the top stay at the top, and the pair at the bottom stay at the bottom.