New here looking for some advice
Moderator: Moderators
-
- Newly registered Member
- Posts: 3
- Joined: Fri Apr 09, 2021 8:50 am
- Has thanked: 0
- Been thanked: 0
New here looking for some advice
Morning folks.
I have just ordered a swingset with climbing wall .
I want to secure it into the ground as tight as possible so that it will with stand the abuse of 3 kids. The problem is the side of the swing set where the climbing part is that the boards go right to the very bottom of the swing set posts. I dont think anchors will last long.
Is there a way i could extend the swing posts to allow me to use postcrete to secure it.
Thanks
I have just ordered a swingset with climbing wall .
I want to secure it into the ground as tight as possible so that it will with stand the abuse of 3 kids. The problem is the side of the swing set where the climbing part is that the boards go right to the very bottom of the swing set posts. I dont think anchors will last long.
Is there a way i could extend the swing posts to allow me to use postcrete to secure it.
Thanks
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
-
- Senior Member
- Posts: 2796
- Joined: Sat Nov 21, 2015 7:08 pm
- Has thanked: 201 times
- Been thanked: 499 times
New here looking for some advice
I'm assuming the frame is timber? Simple if not the prettiest is angle iron screwed to the legs and then that set in concrete. A nicer less obtrusive method would be to drill a hole into each leg along it's length as deep as possible and then screw in a piece of allthread which is then set into concrete
-
- Newly registered Member
- Posts: 3
- Joined: Fri Apr 09, 2021 8:50 am
- Has thanked: 0
- Been thanked: 0
New here looking for some advice
Sorry im not able to post photos or links. If you can google rebo-beat-the-wall-wooden-swing-set-with-double-up-over-climbing-wall-vertex from outdoortoys.
Yes its timber.
Thanks
Yes its timber.
Thanks
- Someone-Else
- Senior Member
- Posts: 14572
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2556 times
New here looking for some advice
You should be able to post pictures if they are not too big. (We have recently had a few new folk who did just that)
You cant post links until you have 10 posts, its to stop spammers.
You may have to do a "Screen grab" to get the picture you want.
You cant post links until you have 10 posts, its to stop spammers.
You may have to do a "Screen grab" to get the picture you want.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times