Parkside PhD 110 c1 pressure washer lance attachment s

All tool questions and recommendations or complaints in this forum please

Moderator: Moderators

Post Reply
Seanbond10
Newly registered Member
Posts: 9
Joined: Thu Jan 21, 2021 2:34 pm
Has thanked: 0
Been thanked: 0

Parkside PhD 110 c1 pressure washer lance attachment s

Post by Seanbond10 »

Bought this from lidl last year for mainly cleaning my patios and my cars. My main issues is the lance handle doesn't have a hold button so I have to keep the trigger held with my hand. Can I get a different lance?
The next issue is the lack of accossiries or any deffinate yes this will go onto your device type message. I'm after a patio racer attachment and a snow foam lance. Or is there an adaptor to take it from a parkside to something like a karcher or nilflisk?

Thanks in advance sean
Seanbond10
Newly registered Member
Posts: 9
Joined: Thu Jan 21, 2021 2:34 pm
Has thanked: 0
Been thanked: 0

Parkside PhD 110 c1 pressure washer lance attachment s

Post by Seanbond10 »

Just an update on this bought a ferrex patio cleaner from aldi fits perfectly so seems this two are interchangeable
Dave54
Senior Member
Posts: 5063
Joined: Wed Feb 25, 2015 7:20 pm
Has thanked: 1300 times
Been thanked: 1175 times

Parkside PhD 110 c1 pressure washer lance attachment s

Post by Dave54 »

I've had three or four pressure washers over the years. As far as I can remember none of the fittings were / are interchangeable.
I'll also say that all the ones before the present one didn't last long despite being put away properly in a frost free place. They were none of them particularly cheap ones. I was going to buy a better make one, and before I could do so I saw some at Lidl at £30 or so IIRC with a 3 year g'tee. Still using the same one years later, although to be fair it doesn't get a lot of heavy use.
User avatar
Argyll
Senior Member
Posts: 6191
Joined: Wed Sep 10, 2008 3:58 pm
Has thanked: 1189 times
Been thanked: 583 times

Parkside PhD 110 c1 pressure washer lance attachment s

Post by Argyll »

The end of one of my attachments broke. It's the attachment you can adjust from a fine spray to a wider spray. I managed to fix it with Sugru for now.
Post Reply

Return to “Tool Talk”