Hello, sorry for the long question.
3 weeks ago my mother was driving her 2018 Panda Easy, and drove over a rock that'd fallen from a hedge, she slowed as much as possible but went over it (like a speedbump at 30 miles an hour)
No obvious problems , but I managed to have a look underneath , and I could only see a slight scuff to the Flexi join in the pipe.
2 weeks later she's said when she parked in the garage there was an eggy smell.
I went out and had a look and there was , but it disappeared quickly , I turned over the engine and there was no eggy smell.
It's happened a few times since , only reason I'd notice it was because it was in the garage, I wouldn't of noticed it outside. The car was MOTd and serviced 2 months ago.
The car runs fine and quiet, and there's no loss of fuel efficiency that I can tell .
It's just the smell now and then.
The car has done 18,500 miles and is 4 years old . I've read horror stories about catalytic converter failure :( could that bump of damaged it ? There's no obvious physical damage that I can see from underneath, plus it's located on the manifold .
Thanks in advance
- Ultimate Handyman Forum Index Other DIY Vehicle maintenance & Repair
- Search
-
- It is currently Thu Mar 06, 2025 3:50 am
- All times are UTC
Fiat Panda Easy 2018 exhaust smell
Vehicle maintenance and repair questions in here please for all questions relating to Cars, Vans etc.
Moderator: Moderators
cwuk82
- Megaross
- Senior Member
- Posts: 1766
- Joined: Tue Jul 19, 2011 10:59 pm
- Location: Swindon
- Has thanked: 28 times
- Been thanked: 110 times
Fiat Panda Easy 2018 exhaust smell
I'm sure it's fine, may just be in the mind, may be something outside of the car, or ghost farting.
Megaross
- Someone-Else
- Senior Member
- Posts: 14782
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2601 times
Fiat Panda Easy 2018 exhaust smell
Post by Someone-Else »
Have you looked in the garage? the ceiling in particular.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section

Someone-Else
-
- Senior Member
- Posts: 17427
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 829 times
- Been thanked: 3601 times
Fiat Panda Easy 2018 exhaust smell
Post by dewaltdisney »
The eggy smell points to the catalytic converter that is close to the front and could be allowing seepage of fumes when the engine is warm. Pop into an exhaust centre and ask them to check for a split or a loose joint.
DWD
DWD
dewaltdisney
Return to “Vehicle maintenance & Repair”
Jump to
- Ultimate Handyman DIY forum
- ↳ Welcome to the Ultimate Handyman DIY Forum
- WELCOME
- ↳ WELCOME
- ↳ About the forums
- UltimateHandyman Discounts
- ↳ Ultimatehandyman Discounts
- ULTIMATE HANDYMAN COMPETITIONS
- ↳ UHM Forum competitions
- SHOW CASE- A place to show us your work
- ↳ Show Case Gallery
- ↳ Rogues Gallery
- TOOL FORUM
- ↳ Power Tool Reviews
- ↳ Bosch
- ↳ budget power tools
- ↳ Dewalt
- ↳ Festool
- ↳ Hikoki/Hitachi
- ↳ Makita
- ↳ Metabo
- ↳ Milwaukee
- ↳ Ryobi
- ↳ Tool Talk
- ↳ Bargain Tools
- ↳ Hand tool reviews
- ↳ Power Tool Manuals
- ↳ Bosch
- ↳ Dolmar
- ↳ ELEKTRA BECKUM
- ↳ Hitachi
- ↳ Husqvarna
- ↳ Jonsered
- ↳ Makita
- ↳ Stihl
- Other DIY
- ↳ Computers
- ↳ communications and broadband
- ↳ Gardeners World
- ↳ Money Saving
- ↳ Vehicle maintenance & Repair
- ↳ Energy Saving
- DIY Forum/Home improvement
- ↳ General DIY forum
- ↳ Acrylic Forum
- ↳ DIY Disasters
- ↳ Stoves
- ↳ Building Forum
- ↳ Carpentry/Joinery Forum
- ↳ Kitchen Fitting
- ↳ Damp Proofing and Remedial problems
- ↳ Electric Forum UK
- ↳ Lighting
- ↳ Alarm Manuals
- ↳ Painting & Decorating Forum
- ↳ Plastering Forum
- ↳ Plumbing Forum
- ↳ Central Heating & Boilers
- ↳ Boiler Manuals
- ↳ Alpha
- ↳ Ariston
- ↳ ATAG
- ↳ Atmos
- ↳ Baxi
- ↳ Biasi
- ↳ Broag
- ↳ Chaffoteux
- ↳ Ferroli
- ↳ Glow-worm
- ↳ Halstead
- ↳ Ideal
- ↳ Intergas
- ↳ Keston
- ↳ Myson
- ↳ Potterton
- ↳ Protherm
- ↳ Ravenheat
- ↳ Saunier Duval
- ↳ Sime
- ↳ Thorn
- ↳ Vaillant
- ↳ Viessmann
- ↳ Vokera
- ↳ warmflow
- ↳ Worcester Bosch
- ↳ Shower Manuals
- ↳ Tiling Forum
- ↳ Metalworking Forum
- General
- ↳ The Lounge
- ↳ The games corner
- ↳ The Grumpy corner
- ↳ The Sport corner
- ↳ The Cookery corner
- ↳ The Music Corner
- ↳ BUY - SELL - FREE