Advice for decking

Wood working questions and answers in here please

Moderator: Moderators

Post Reply
User avatar
davek0974
Senior Member
Posts: 514
Joined: Mon Dec 24, 2007 10:27 am
Location: Hertfordshire
Has thanked: 103 times
Been thanked: 20 times

Advice for decking

Post by davek0974 »

I'm looking to fit a little decking area for my girlfriend in her tiny outdoor space.

I want to keep it as low as possible, it will mostly be over concrete slab of 2.5m by 1.5m but along the far end there is a longer strip of 3.6m x 1m

Low profile is important, as it is mostly over stable concrete I was thinking of laying it on something like treated 50 x 75mm timbers laying face-on so the height would be 50 + the decking thickness.

I can drill and anchor the frame to the slab, the 1m x 3.6m part is over soil so can dig out and fit some brick pads on cement, this is not a traffic area mostly, will probably hold the wheelie bin.

Any suggestions :)
Screenshot 2023-06-30 at 18.38.14.png
Screenshot 2023-06-30 at 18.38.14.png (51.29 KiB) Viewed 1101 times
DIY - Joining things together to make stuff ;)
https://davekearley.co.uk/
User avatar
big-all
Pro Carpenter
Posts: 23585
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 735 times
Been thanked: 2339 times

Advice for decking

Post by big-all »

you are actually restricted to 50% off outdoor space covered [total garden area ] without the need for planning permission
argos do decking tiles that are low profile
https://www.argos.co.uk/search/decking/ ... ng:decking
we are all ------------------still learning
User avatar
davek0974
Senior Member
Posts: 514
Joined: Mon Dec 24, 2007 10:27 am
Location: Hertfordshire
Has thanked: 103 times
Been thanked: 20 times

Advice for decking

Post by davek0974 »

50% really? That makes the job pointless on an area this small.

She was going to get it slabbed all over - is paving any different than decking with regards planning??
DIY - Joining things together to make stuff ;)
https://davekearley.co.uk/
User avatar
Someone-Else
Senior Member
Posts: 14624
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2575 times

Advice for decking

Post by Someone-Else »

I would go with slabs, cheaper, never rots, doesn't need oiling, and if you stain one, lift it up, flip it over put it back.
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
User avatar
davek0974
Senior Member
Posts: 514
Joined: Mon Dec 24, 2007 10:27 am
Location: Hertfordshire
Has thanked: 103 times
Been thanked: 20 times

Advice for decking

Post by davek0974 »

Someone-Else wrote: Fri Jun 30, 2023 6:14 pm I would go with slabs, cheaper, never rots, doesn't need oiling, and if you stain one, lift it up, flip it over put it back.
Probably, on an area that small can you lay slab without grout lines?

Thinking more, if we just slab the concreted part of 2.5 x 1.5m and then gravel the dirt strip it would mean keeping below 50% and not having to dig for hardcore etc.

Its a pathetic size though
DIY - Joining things together to make stuff ;)
https://davekearley.co.uk/
Post Reply

Return to “Carpentry/Joinery Forum”