Soudal PU Adhesive

Argyll · Post by **Argyll** » Sat Sep 16, 2023 6:25 pm

Not tools per se.

I'm not sure if anyone else has had the problem of Soudals adhesive foam not sealing when removing from the gun? I've wasted about five tins of the stuff and a gun.

I never leave the sealant on the gun at the end of the day as I've ruined two guns that way when they became blocked. My most recent purchase of Soudals adhesive foam has seen five tins not sealing correctly one I removed them from the gun.

I called Soudal who asked me to email them. I'm awaiting a response.

[youtube]https://youtube.com/shorts/4hAi4MOX3hI? ... zzs_xdagCj[/youtube]

Argyll · Post by **Argyll** » Sat Sep 16, 2023 6:28 pm

Posting this on my phone and it won't post the YouTube link properly. Can't be arsed

oz0707 · Post by **oz0707** » Sun Sep 17, 2023 9:47 am

I always leave foam on the gun never take it off. Ive only ever lost guns by taking the foam can off and it drying out. Leave the cans on till empty then change. Most times i change foam the old can doesn't seal up and whats left squirts out its the nature of the beast

fin · Post by **fin** » Sun Sep 17, 2023 2:28 pm

aye i always leave the can on till its empty. then run a cleaner through the gun and fit a new can.

so long as you close off the gun control knob at the back of the gun its sound. then just cut what ever is left off witha knife before you use the gun again