- IMG_7852.jpeg (193.69 KiB) Viewed 526 times
- IMG_7851.jpeg (233.81 KiB) Viewed 526 times
- IMG_7850.jpeg (281.79 KiB) Viewed 526 times
How do I replace flush hinges with regular?
Moderator: Moderators
-
WhoDaresWins
- Senior Member
- Posts: 114
- Joined: Fri Sep 23, 2016 3:06 pm
- Has thanked: 16 times
- Been thanked: 2 times
How do I replace flush hinges with regular?
Recently bought a house and need to clean up and re-varnish the doors. Two of the doors however have flush hinges which I don’t like and want to replace with regular loose pin hinges like in the photo. How do I go about this so the door stays in alignment? Can I measure up whilst the door is in place?
-
dewaltdisney
- Senior Member
- Posts: 16988
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 814 times
- Been thanked: 3508 times
How do I replace flush hinges with regular?
Re use that exisiting hinge mortice and cut an opposing one in the door to mount the new hinge. I think the door gap for the lay-on hinge will be similar to the new.
DWD
DWD