Moving a socket

All your electrical questions regarding electrics from within the United Kingdom

Moderator: Moderators

Post Reply
AndyBaldock
Senior Member
Posts: 311
Joined: Sun May 11, 2014 7:30 pm
Has thanked: 0
Been thanked: 2 times

Moving a socket

Post by AndyBaldock »

I have to move plug sockets from one all to another (to do with a pipe and a freezer). I’ve been asked to avoid conduit. Is this possible and if so, should I keep the fuse box and wire to another fuse box on the left? Or is there a better way that I haven’t thought of?

Many thanks,

Andy
Attachments
image.jpg
image.jpg (263.7 KiB) Viewed 394 times
Neelix
Senior Member
Posts: 1311
Joined: Mon May 03, 2021 1:36 pm
Has thanked: 117 times
Been thanked: 214 times

Moving a socket

Post by Neelix »

Not 100% sure I understand the op.

Is this your property ?
AndyBaldock
Senior Member
Posts: 311
Joined: Sun May 11, 2014 7:30 pm
Has thanked: 0
Been thanked: 2 times

Moving a socket

Post by AndyBaldock »

Sorry it wasn’t very clear at all. I’ve been asked to move the sockets on the right hand side to the left hand side of the pipe by my wife. I will need to run extra cable chased into the wall in conduit. I was wondering what the best way to go about this is. The wires enter the socket from the back wall and there is no spare cable.

I didn’t know if I should leave the current fuse box in place, chase in some wires around the pipe to another fuse and then have the sockets attached to the fuse. This way, the joins in the wire will be safe. I’m probably missing a more obvious method.

Hope that makes more sense.
User avatar
Someone-Else
Senior Member
Posts: 14628
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2575 times

Moving a socket

Post by Someone-Else »

I don't see that you would gain anything by moving the socket a few cm. Put the freezer away from the wall, leave the socket where it is.
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
Post Reply

Return to “Electric Forum UK”