i am trying to change a push-up hatch cover to a hinged down one. i will have to cut the existing one down to size. but i cant figure out how to hang it it has a fitted acatrave all round.
and has you can see ( hopefully).it is rounded. how can i do it.
loft hatch cover
Moderator: Moderators
-
Someone-Else
- Senior Member
- Posts: 14572
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2556 times
loft hatch cover
Hello, welcome to the forum, may I suggest you try posting your pictures and video again, only one worked, All we see is
I also suggest you use the following buttons in order.
My signature may also help.
- k.jpg (6.71 KiB) Viewed 477 times
- button.jpg (6.51 KiB) Viewed 477 times
My signature may also help.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section