Priming with Bond It SBR

wassupjg · Post by **wassupjg** » Wed Apr 17, 2024 9:25 pm

Hi, super basic question,

Okay to prime standard multifinish surface and left to dry the day before tiler comes, with Bond It SBR Admixture 1:1 with water?

Would post link to product but 'can't post image, email or url links that are external to this domain'...

Thanks!

aeromech3 · Post by **aeromech3** » Thu Apr 18, 2024 7:31 am

What instructions on container? what does tiler say?
My thoughts: 1 to 1 is a very strong primer mix for non porous surfaces or edges of wood. Normal for walls and wood floor 1:2 and for concrete 1:4.

wassupjg · Post by **wassupjg** » Thu Apr 18, 2024 2:47 pm

aeromech3 wrote: ↑Thu Apr 18, 2024 7:31 am What instructions on container? what does tiler say?
My thoughts: 1 to 1 is a very strong primer mix for non porous surfaces or edges of wood. Normal for walls and wood floor 1:2 and for concrete 1:4.

Cheers, instructions say 1:1 for general priming, gypsum multifinish surface is porous no?