I was hoping someone could help me with what I expect is a pretty basic query. My boiler has lost pressure & I need to refill it. Have searched online & watched videos, it seemed relatively straightforward with the videos showing a tap or screw being opened to allow the filling loop to let water into the boiler. However, my filling loop is shown on the attached & I can't work out how to open the filling loop to allow water into the boiler.
I am guessing that I need to open the left hand side as it looks like there is a thread for something in the hole just above where the filling loop connects to the pipe, but I cannot work out whether something is missing (such as a tap), whether a some kind of key needs entering into the hole (which I don't think I have) or whether the entire part needs turning with a wrench.
Any help would be gratefully received.
Thanks.
Refill Vaillant Boiler - help please!
Moderator: Moderators
- Someone-Else
- Senior Member
- Posts: 14578
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2559 times
Refill Vaillant Boiler - help please!
A handle is missing, I know this because............
It looks just like mine.
It's supposed to have a handle like you find on a washing machine valve (The bit the hose connects to, one is red, the other is blue) But like mine, they often snap, so I just use an adjustable spanner. You turn the outer square part. There should also be another "handle" (usually bigger) on the other end of the braided pipe, but I can't see one in your picture.
Here is what my "filling loop" looks like from further back
I have to turn the black lever as well as the one with the missing handle
It looks just like mine.
It's supposed to have a handle like you find on a washing machine valve (The bit the hose connects to, one is red, the other is blue) But like mine, they often snap, so I just use an adjustable spanner. You turn the outer square part. There should also be another "handle" (usually bigger) on the other end of the braided pipe, but I can't see one in your picture.
Here is what my "filling loop" looks like from further back
I have to turn the black lever as well as the one with the missing handle
Last edited by Someone-Else on Tue Aug 27, 2024 5:32 pm, edited 1 time in total.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
-
- Senior Member
- Posts: 16941
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 807 times
- Been thanked: 3498 times
Refill Vaillant Boiler - help please!
The valves probably had plastic taps that got soft and the square drive turned into an oval. I had my Vailllant filling loop taps replaced with metal ones which are far better. Use a square drive or a socket so the edges are preserved. I cannot see clearly if that is an isolator at the other end used to stop backflow?
DWD
DWD