advice would be greatthanks
fuses
Moderator: Moderators
-
Someone-Else
- Senior Member
- Posts: 14577
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2559 times
fuses
Depends what you will be connecting it to.
If you are adding a plug, put a 3Amp fuse in the plug.
If you are adding it to the lighting circuit/changing an existing light, it should already have a 6Amp mcb
If you are adding a plug, put a 3Amp fuse in the plug.
If you are adding it to the lighting circuit/changing an existing light, it should already have a 6Amp mcb
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section
-
ericmark
- Senior Member
- Posts: 4260
- Joined: Tue May 10, 2011 2:43 am
- Location: Mid Wales
- Has thanked: 116 times
- Been thanked: 782 times
fuses
230 watt = 1 amp, so standard BS 1362 fuses come in 1, 2, 3, 5, 7, 10 and 13 amp and the preferred sizes are 3 and 13, so 3 amp would normally be used, but even a 1 amp would be ample.