Hi, wonder if anyone can help.
we just changed all the immersion heater elements in the tank and now none come on at night when the cheap rate tarriff kicks in? everything was working fine at the end of last year.
someone mentioned a green light ???
anyone help?
thanks
Churchill Imstor Heating System
Moderator: Moderators
-
Someone-Else
- Senior Member
- Posts: 14609
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2571 times
Churchill Imstor Heating System
If they were working before you changed them, and now they are not working, it suggests there is a connection error. It may also be the isolator for the heaters is off.
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me. Click Here for a video how to add/change picturesInept people use the QUOTE BUTTON instead of the QUICK REPLY section