Loft Ladder
Moderator: Moderators
-
- Newly registered Member
- Posts: 3
- Joined: Sat Nov 09, 2024 4:24 pm
- Has thanked: 2 times
- Been thanked: 0
Loft Ladder
Hi new on here hello all, so I need to know which width of combined folding wooden ladder I should purchase as my joists are just under 570mm. Can I purchase a 110 x545 ? Or if possible to find 570mm wide? Fortunately I dont need to worry about lenght I have a 24 year old house with roof truss type attic. Any advice welcome. Thankyou.
-
- Senior Member
- Posts: 16941
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 807 times
- Been thanked: 3498 times
Loft Ladder
If you go with the 545 it only needs an inch of packing. You could do this with ply or other man made board.
DWD
DWD
- These users thanked the author dewaltdisney for the post:
- jrroxx (Sat Nov 09, 2024 4:57 pm)
- Rating: 7.14%
-
- Senior Member
- Posts: 16941
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 807 times
- Been thanked: 3498 times
Loft Ladder
I see the need for double rails, I am in that club too. But the double rail may impede you getting stuff up there so think of the box or crate sizes you intend to hump up.
DWD
DWD
- Someone-Else
- Senior Member
- Posts: 14578
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2559 times
Loft Ladder
Just saying, we use a "3 way ladder" to get in/out of the loft, we use the "steps" as hand holds (it has no handrails) as handrails considerably reduce the hatch width, it's OK with the "Once a year tree" (Long and conical) but the boxes just fit through the hatch (with the ladder there) smaller boxes sound a better idea, but some things just won't fit in a small box.
- These users thanked the author Someone-Else for the post:
- jrroxx (Sun Nov 10, 2024 12:55 pm)
- Rating: 7.14%
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section