Add single socket to fused spur

[hiace_drifter]

The fuse (in the FCU) is there to protect the cable, not the device. so a socket (whether single or double) run in 2.5mm twin and earth can be protected by a 13 A fuse.

Thanks I did go for 13A fuse in the end. And the socket is now up and running. A small job by most people's standards but I'm still very pleased with myself. I will probably take the cover off the fused outlet and shorten the cables with new found stripping tips!

[hiace_drifter]

I use a cable / wire stripper like this

It will cut the outer and the inner sheiths.
But mine is a lidl / aldi set which are half the cost but decent quality.

I normally leave a cm or so but it depends on the depth of the backbox

That stripper worked a TREAT! Thanks.