Page 2 of 2

Re: Any beading recommendations AFTER tiles have been placed

Posted: Sun Sep 05, 2010 6:49 pm
by royaloakcarpentry
You can get the corner tiles off. If you cut the grout lines out, (or partly out) you will minimise the chances of damaging bordering tiles.

Take it nice and easy and slowly.

Re: Any beading recommendations AFTER tiles have been placed

Posted: Sun Sep 05, 2010 10:11 pm
by arshad76
Thanks, well I know now it isn't a total loss. If anyone can recommend a decent tiler in the Manchester/Macclesfield area who would be able to do this then that would be great, if not I'll contact my local tops tiles.

I'll try to post some photos up if all goes well.

Thanks again

Re: Any beading recommendations AFTER tiles have been placed

Posted: Sat Sep 11, 2010 7:10 pm
by Rookery
The tiling looks very poor as does the detail around the light switch. I'm guessing that any tiling around the window will be equally poor. I would take it off and get a real tiler in to do it properly.