www.ultimatehandyman.co.uk

Posted: **Fri Dec 01, 2006 7:12 pm**

Please anybody......Tried everyware with no joy. I NEED A BLADE BOLT & WASHER FOR A BOSCH PKS 66 CIRCULAR SAW.

Posted: **Fri Dec 01, 2006 7:29 pm**

I'll ask a friend over the weekend, he might be able to source one as his firm sells some Bosch tools. I'll post back when I get his answer or PM you

Posted: **Fri Dec 01, 2006 8:02 pm**

Try the link below it is from boschs website and will enable you to find the part number for the item you need then you can contact one of their service agents to obtain the part you need.

Nick
https://etli.bosch-pt.com/(3but3jvk2rx4 ... OUNTRY=258

Posted: **Fri Dec 01, 2006 8:22 pm**

Good find sparkydude

according to that site it is a HEX-SOCKET-HEAD CAP SCREW / M6x14 MM

part no. 1 603 414 007

If you go to a company that sells nuts and bolts they will probably give you a M6 hex socket head cap screw for free! Tools factors sell these by the thousand.

I'll see what my mate says

Posted: **Sat Dec 02, 2006 12:42 am**

blade bolts are left hand thread so you can not use a standard bolt

I needed one for my dewalt mitre saw, my local service agent got me one, it cost me 50p

Posted: **Sat Dec 02, 2006 12:43 pm**

tim'll fix it wrote:blade bolts are left hand thread so you can not use a standard bolt

I needed one for my dewalt mitre saw, my local service agent got me one, it cost me 50p

Are blade bolts not just left hand threads on chop saws?

I have a circular saw and a chop saw, I am not 100% certain without looking, but I think that chopsaws are left hand threads and circular saws are right hand threads I think!

Posted: **Sun Dec 03, 2006 11:31 pm**

maybe I only change the blade on my chopsaw regularly

www.ultimatehandyman.co.uk

Bosch Blade Bolt

Bosch Blade Bolt