Page 1 of 1
Galvanised Steel Trim Bent
Posted: Fri Apr 15, 2022 6:26 pm
by Amo42
Hi. I have a field shelter that got flipped upside down in the last round of storms. We have got it back together now but some of the edge trims have been bent or dented in places. They are galvanised steel apparently. Does anyone have any ideas on how we can straighten them ourselves?
Thanks
Galvanised Steel Trim Bent
Posted: Fri Apr 15, 2022 6:41 pm
by dewaltdisney
How long and thick are the trims?
DWD
Galvanised Steel Trim Bent
Posted: Fri Apr 15, 2022 6:48 pm
by Amo42
Off the top of my head they are 5ft long, a U shape (they go over the step into the shelter) and about 5mm thick I’d say.
Thanks
Galvanised Steel Trim Bent
Posted: Fri Apr 15, 2022 9:12 pm
by dewaltdisney
Have a look to see if they have the size you need
https://hardware-warehouse.co.uk/u-channel
DWD