Oven size

Argyll · Post by **Argyll** » Tue Nov 07, 2023 3:08 pm

I've seen an oven for sale but I'm slightly confused about the dimensions.

It states:

Dimensions (mm) (HxWxD)
594x595x567

Built-in Dimensions (mm) (HxWxD)
590x560x550

What's with two sets of dimensions? I have an oven cabinet 563mm wide but states 595mm in one and 560mm in the other. Dunno which is which.

I can only assume there's a lip at the front which is the largest size but the smaller size slides into the cabinet housing. Am I correct? I just want to make sure before ordering.

Someone-Else · Post by **Someone-Else** » Tue Nov 07, 2023 3:13 pm

I would suspect one is for the oven the other is for the space required (carcass?) I would contact the seller to be sure.

Argyll · Post by **Argyll** » Tue Nov 07, 2023 3:57 pm

I did but they were as useful as a chocolate teapot. Probably based abroad somewhere and totally clueless.

dewaltdisney · Post by **dewaltdisney** » Tue Nov 07, 2023 4:40 pm

Can you download the fitting instructions?

DWD

Scotty001 · Post by **Scotty001** » Thu Nov 09, 2023 7:09 am

I'd hazard a guess that the built in dimensions are the physical size of the "main oven unit" that fits into the carcas and dimensions is including the face plate pannels with controls.
If you start to pull out your exisint built in oven you will see there is a "lip" around the unit that fits into the carcas (hope I've explained that OK?)

London mike 61 · Post by **London mike 61** » Thu Nov 09, 2023 8:19 am

If the brand of oven is stocked by other suppliers then contact one of them to find out if the oven will fit in the gap. Very few ovens are a non standard size in my experience.

Mike