Bathroom Wall Prep
Posted: Tue Aug 27, 2024 3:21 pm
Hi,
I'm after some advice having had conflicting opinions.
On the right-hand stud wall, I am installing 12mm nomoreply. The stud work is being replaced.
On the left-hand wall, I have brick followed by plaster. For me to be able to tank appropriately, would it be best if I removed all plaster from the brickwall and replace with nomoreply - so that I have a clean 90 degree angle butting two pieces of nomoreply together - or is there a better option?
I'd prefer not to install nomoreply on top the existing plaster work as this would mean I could no longer put a 1100mm shower tray in (without cutting a notch which i'm not keen on, as i'd have to do that for the opposing brick side too).
Thanks in advance,
Danny.
I'm after some advice having had conflicting opinions.
On the right-hand stud wall, I am installing 12mm nomoreply. The stud work is being replaced.
On the left-hand wall, I have brick followed by plaster. For me to be able to tank appropriately, would it be best if I removed all plaster from the brickwall and replace with nomoreply - so that I have a clean 90 degree angle butting two pieces of nomoreply together - or is there a better option?
I'd prefer not to install nomoreply on top the existing plaster work as this would mean I could no longer put a 1100mm shower tray in (without cutting a notch which i'm not keen on, as i'd have to do that for the opposing brick side too).
Thanks in advance,
Danny.
- IMG_5104.jpg (581.58 KiB) Viewed 1114 times